www.YamahaR.co.uk

Iamwilko

I’ll give it a try at the weekend I think

Iamwilko

Sounds like exup to me but you say that's definitely working :think: I can't see it happening on all four cylinders but where the HT leads screw in t…login to view the rest of this post

Iamwilko

Sounds like exup to me but you say that's definitely working :think: I can't see it happening on all four cylinders but where the HT leads screw in t…login to view the rest of this post

Iamwilko

I’m completely out of ideas guys, please help. The bike last summer when pulling away from lights and at roundabouts, ticks over fine, go to pull away…login to view the rest of this post

Iamwilko

I'd imagine the 5jj would be the same . . . . . . Yep Right side of the page , half way down , related fitment https://www.partzilla.com/product/yama…login to view the rest of this post

Iamwilko

I'd imagine the 5jj would be the same . . . . . . Yep Right side of the page , half way down , related fitment https://www.partzilla.com/product/yama…login to view the rest of this post

Iamwilko

Morning all,

I think I have a faulty fuel pump on my 4XV. Are there any other models of bike that run the same pump or are there any upgrades that ca…login to view the rest of this post

Iamwilko

Moise wrote: ↑Sun May 24, 2020 7:58 am
Iamwilko wrote:
So you just set the screws to the 5JJ settings as per the manual?
Yes, that's what I've done.

…login to view the rest of this post

Iamwilko

Fit size 15 pilot jets while you have them apart I have read this. What’s the benefit? They have 17.5 in them at the moment. Where’s the best place t…login to view the rest of this post

Iamwilko

jompy wrote: ↑Sat May 23, 2020 9:19 pm Fit size 15 pilot jets while you have them apart

I have read this. What’s the benefit? They have 17.5 in them…login to view the rest of this post

Iamwilko

What's the problem with the carbs? If the ultrasonic bath is large enough, leave them as a unit. The internals won't clean any better if you split th…login to view the rest of this post

Iamwilko

They are new carbs. The ones on the bike have seen better days and I’m having trouble with them. Plan was while they’ve off the bike do the clean prop…login to view the rest of this post

Iamwilko

2002r1jon wrote: ↑Sat May 23, 2020 3:51 pm Just chuck it all in mate, itll be fine

Was hoping you would say that. Do I need to keep each carb parts …login to view the rest of this post

Iamwilko

Hi guys, I’m sure this has been covered before. I’ve stripped down my carbs ready to put into the ultrasonic cleaner I have, but I was wondering what …login to view the rest of this post

Iamwilko

Their standard, it’s all sorted now. I had a bad earth

Iamwilko

I’ve changed my wiring loom for a NOS one today, plugged everything in and checked everything, all is working fine apart from the indicators, if I swi…login to view the rest of this post

Iamwilko

My front lights have stopped working, the high beam works and the rear lights work fine but no front light, could this be done to the relay?

Iamwilko

That’s good to know. I’ll get some of the gold stuff too, thanks Moise

Iamwilko

Right I have test ridden the bike today for around 20 miles and didn’t seem to have any issues. Got home and tested the voltage of the battery and wa…login to view the rest of this post

Iamwilko

Right I have test ridden the bike today for around 20 miles and didn’t seem to have any issues. Got home and tested the voltage of the battery and wa…login to view the rest of this post

Iamwilko

Right I have test ridden the bike today for around 20 miles and didn’t seem to have any issues. Got home and tested the voltage of the battery and was…login to view the rest of this post

Iamwilko

Sorry to open up an old post but I’m having similar problems. Tested the charge of the battery at 5k rpm and with the lights off it sits at 14.2 but …login to view the rest of this post

Iamwilko

Sorry to open up an old post but I’m having similar problems. Tested the charge of the battery at 5k rpm and with the lights off it sits at 14.2 but w…login to view the rest of this post

Iamwilko

How do I check the resistance Moise?

Iamwilko

Right I’ve changed the clocks and the new set are going to 8k rpm for the fuel sender, I’ve cleaned the white connector where this plugs in and have c…login to view the rest of this post

www.YamahaR.co.uk

Search found 94 matches

Re: Bike trying to knock out when at low revs

Re: Bike trying to knock out when at low revs

Re: Bike trying to knock out when at low revs

Bike trying to knock out when at low revs

Re: Any other model fuel pumps

Re: Any other model fuel pumps

Any other model fuel pumps

Re: Ultrasonic cleaning of carbs

Re: Ultrasonic cleaning of carbs

Re: Ultrasonic cleaning of carbs

Re: Ultrasonic cleaning of carbs

Re: Ultrasonic cleaning of carbs

Re: Ultrasonic cleaning of carbs

Ultrasonic cleaning of carbs

Re: Indicators all flashing together

Indicators all flashing together

Front lights not working

Re: Charging

Re: Charging

Re: Charging

Re: Charging

Re: Charging

Re: Charging

Re: 11k rpm fault code

Re: 11k rpm fault code