Search found 195 matches
- Fri Nov 16, 2018 6:29 pm
- Forum: R1 98-99 4XV
- Topic: Red seat , recover or spray ?
- Replies: 26
- Views: 2788
Re: Red seat , recover or spray ?
I used a company in Reddich called Gliptone for leather cleaner, restorer and dye for my car interior that is also good for recolouring vinyl. They ha…login to view the rest of this post
- Sun Sep 24, 2017 8:16 am
- Forum: R1 98-99 4XV
- Topic: Air leak on my 4xv
- Replies: 12
- Views: 1526
Re: Air leak on my 4xv
The carbs are easy to disturb on the intake rubbers, worth slackening the clamps and removing/refitting making sure they are square to the intake and …login to view the rest of this post
- Sun Sep 24, 2017 8:11 am
- Forum: R1 98-99 4XV
- Topic: Fitting an APE
- Replies: 36
- Views: 2337
Re: Fitting an APE
I got around to fitting my manual CCT last week. The non-tensioner side of the chain seemed too loose with the auto tensioner fitted and the plastic c…login to view the rest of this post
- Wed Aug 16, 2017 4:45 pm
- Forum: R1 98-99 4XV
- Topic: 4xv temp on dash stays at LO
- Replies: 12
- Views: 1460
Re: 4xv temp on dash stays at LO
Mine did exactly this. It turned out to be copper corrosion of the earth wire beneath the insulation where water/salt had penetrated. I had to cut the…login to view the rest of this post
- Tue Aug 08, 2017 9:35 am
- Forum: R1 98-99 4XV
- Topic: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
- Replies: 5
- Views: 1172
Re: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
Thanks Pete, you are spot on regarding the jacking threads. Looks like I need another stripdown and inspect the bearing holder and cases. Something ju…login to view the rest of this post
- Sun Aug 06, 2017 9:49 am
- Forum: R1 98-99 4XV
- Topic: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
- Replies: 5
- Views: 1172
Re: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
Next question: The gears now turn smoothly, all select fine. Whilst assembling the input shaft, I noticed the large bearing holder with the three torx…login to view the rest of this post
- Sat Aug 05, 2017 11:42 am
- Forum: R1 98-99 4XV
- Topic: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
- Replies: 5
- Views: 1172
Re: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
I just took a look at a few Youtube repair videos and they all seem to have the shielding on the outside face away from the gears. Looking at the oil …login to view the rest of this post
- Sat Aug 05, 2017 11:20 am
- Forum: R1 98-99 4XV
- Topic: 4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
- Replies: 5
- Views: 1172
4XV OUTPUT SHAFT SMALLER BEARING ORIENTATION
Gents, I have replaced the faulty gear clusters in my spare 4XV engine, however the output shaft is a bit of a mystery. I have replaced the big output…login to view the rest of this post
- Thu Aug 03, 2017 9:37 pm
- Forum: R1 98-99 4XV
- Topic: 4XV PARTS NEEDED
- Replies: 5
- Views: 1364
Re: 4XV PARTS NEEDED
Also try CMSNL as they tend to have stock that nobody else can get.
- Sun Jul 23, 2017 8:36 am
- Forum: R1 98-99 4XV
- Topic: Fitting an APE
- Replies: 36
- Views: 2337
Re: Fitting an APE
My 4XV has always made similar low speed, part-throttle noises to yours Moise which I also blamed on the Exup with occasional stuttering when picking …login to view the rest of this post
- Sat Jul 15, 2017 8:57 am
- Forum: General Bike Chat
- Topic: Servicing!
- Replies: 16
- Views: 1375
Re: Servicing!
The 4XV is a doddle to work on. I stripped and rebuilt mine after buying it as a project bike (aka a shed). Don't be afraid to get spannering, there i…login to view the rest of this post
- Thu Apr 20, 2017 1:10 pm
- Forum: R1 98-99 4XV
- Topic: Valve clearance check
- Replies: 12
- Views: 1544
Re: Valve clearance check
A word of warning. Be VERY careful: If you have the cams out to check/reshim, be sure to turn the engine over by hand after reassembly, then check aga…login to view the rest of this post
- Thu Apr 20, 2017 1:05 pm
- Forum: R1 98-99 4XV
- Topic: dont think they want to sell
- Replies: 13
- Views: 1456
Re: dont think they want to sell
It belongs in a museum, alongside all the other unridden insults to motorcycling.
- Wed Apr 19, 2017 1:21 pm
- Forum: R1 98-99 4XV
- Topic: Valve clearance check
- Replies: 12
- Views: 1544
Re: Valve clearance check
I've re-used the rubber cam cover gasket without any issues, despite the recommendation to replace them.
Valve clearances are obviously much easier w…login to view the rest of this post
Valve clearances are obviously much easier w…login to view the rest of this post
- Thu Mar 09, 2017 5:17 pm
- Forum: Projects
- Topic: R1 SP Project
- Replies: 7
- Views: 1525
Re: R1 SP Project
Didn't the SP run a slipper clutch as standard ??
- Sun Mar 05, 2017 12:39 pm
- Forum: England
- Topic: Loomies - Members' threats of an appearance in 2017
- Replies: 124
- Views: 23209
Re: Loomies - Members' threats of an appearance in 2017
Despite a reasonable weather forecast, just got drenched in a hailstorm walking the dog. Dont think I'll bother getting the bike out today. If you are out, have a good run and ride safe.
- Sat Mar 04, 2017 4:38 pm
- Forum: England
- Topic: Loomies - Members' threats of an appearance in 2017
- Replies: 124
- Views: 23209
Re: Loomies - Members' threats of an appearance in 2017
What time in the afternoon?
I might drag the 4XV out and pop up for a brew.
I might drag the 4XV out and pop up for a brew.
- Mon Feb 27, 2017 8:19 pm
- Forum: R1 98-99 4XV
- Topic: 4XV Engine -advice please
- Replies: 12
- Views: 1492
Re: 4XV Engine -advice please
Cheers Pete, that makes perfect sense. Looks like I've bought another lemon then. :angry-screaming: Any chance I can bring it over for you to have a l…login to view the rest of this post
- Mon Feb 27, 2017 8:20 am
- Forum: R1 98-99 4XV
- Topic: 4XV Engine -advice please
- Replies: 12
- Views: 1492
Re: 4XV Engine -advice please
Has the bike ran with this gearbox in before? Reason I ask is a lad I kno put a 5JJ gearbox into his 4XV and had the exact same symptoms as you are d…login to view the rest of this post
- Sun Feb 26, 2017 9:15 pm
- Forum: R1 98-99 4XV
- Topic: 4XV Engine -advice please
- Replies: 12
- Views: 1492
Re: 4XV Engine -advice please
Thanks guys, it has the longer modified shift arm. Its identical to the one on my bike, so I might just swap shift shaft parts over and see if I can c…login to view the rest of this post
- Sun Feb 26, 2017 1:05 pm
- Forum: R1 98-99 4XV
- Topic: 4XV Engine -advice please
- Replies: 12
- Views: 1492
Re: 4XV Engine -advice please
Okay, so the plot thickens..... Got the oil/water pump out, sump was pristine. The generator rotor bolt looks like it has been reused, and the oil pum…login to view the rest of this post
- Fri Feb 24, 2017 6:40 pm
- Forum: R1 98-99 4XV
- Topic: 4XV Engine -advice please
- Replies: 12
- Views: 1492
4XV Engine -advice please
Just started stripping the spare engine I bought for my 4XV, it was stuck in gear but I managed to free the selector up and find 1st/2nd but no higher…login to view the rest of this post
- Sun Feb 12, 2017 9:21 pm
- Forum: R1 98-99 4XV
- Topic: Removed exup valve now clocks are playing up
- Replies: 24
- Views: 1400
Re: Removed exup valve now clocks are playing up
If you removed the servo motor for the exup, the tacho will probably 'dance around' to show diagnostic error codes. It does on the 4xv models, also fo…login to view the rest of this post
- Sun Feb 05, 2017 8:31 am
- Forum: R1 00-01 5JJ
- Topic: New bore lining
- Replies: 15
- Views: 1808
Re: New bore lining
Jompy, do you still have those engine cases?
Assuming the bores are still sound, a good engine rebuild specialist could line bore the cases and sour…login to view the rest of this post
Assuming the bores are still sound, a good engine rebuild specialist could line bore the cases and sour…login to view the rest of this post
- Sat Feb 04, 2017 8:06 pm
- Forum: R1 00-01 5JJ
- Topic: New bore lining
- Replies: 15
- Views: 1808
Re: New bore lining
Sorry, my original post is a bit unclear. The 'liner' is actually a Nikasil sleeve, this would need to be machined out then a steel liner pressed in a…login to view the rest of this post