www.YamahaR.co.uk

Good news, got a new exide battery, removed the starter and after opening it found out that the starter brushes were totally stuck, cleaned the area a…login to view the rest of this post

well in my case it helped if I just pushed my bike and released the clutch while in gear. It instantly cleared the code. Push started the engine, but …login to view the rest of this post

And yet again I have problems. The bike won`t start. At the beginning it was just the first time after the bike was standing for a while. Starter was …login to view the rest of this post

…login to view the rest of this post

Story of the Fix-upper goes on in there-> viewtopic.php?f=38&t=16490" onclick="window.open(this.href);return false;.

Regards!

Hi guys, So I bought a mixed R1, that has a 5VY frame and 4C8 engine, wiring and ECU. Some things that I`ve already fixed: 1. The engine light was on …login to view the rest of this post

Whoop-Whoop! I did find my outside air temp sensor, or at least I found the connector. It had the turn signal relay connected to it, which is just magnificent in my opinion. I replaced it with a resistor that took the reading down to 13 degrees. So fingers grossed that She will fire up better tomorr...

So I took Her for a spin with a camera with me. here is the result, Enjoy!

Should 2007 R1 have Ambient temperature sensor? I have an option on my dash but it shows numbers that are clearly wrong.

Boooom... Check engine light is gone. Now the fuel map is still a bit off. Bike still struggles on cold engine start and when I let go of the throttle it start to bang on exhaust. So I think the mixture is off. Should I compensate it with Power Commander? Went to My local ECU guy, He told that its n...

So. I got the diag. mode to work. But still after clearing errors, o2 sensor error (error 24) still there. Tried both, with o2 sensor and o2 elliminator connected but still shows error and cant clear. Anybody got some ideas? Should o2 sensor show some resistance when cold and disconnected from exhau...

Hi,

I have ER-4 error code and can`t enter Diag mode. Is there a way to enter? I`ve read some post about the Immobiliser antenna, but i can`t find an…login to view the rest of this post

oh, yes that`s it

Where to begin. I bought it in september, last year. As far as I know, it has: 2006 frame, speedometer. 2007 wiring, ECU and engine. It has Carbon-like fairings as shown on pictures. Engine and Tune-up wise it should be pretty much oem. Just today I received o2 sensor what was missing, Also I am hav...

Will need to take my bike for a photo shoot for better pictures then

Hi Guys,

I`m Andreas from Estonia, I ride a 06-07 mix-up R1. Bike has some issues, so I hope I will find some helpful info from some more experienced mechanic.

Best Regards.