www.YamahaR.co.uk

Hi guys. After a full strip down of my r1 and fitting some upgrades, I fitted a quick shifter so full race unit I got her going took her out and reali…login to view the rest of this post

Or that's great thanks a lot that was one of those things that has been doing my head in. I dont think the left is there that's why I cant see it. Tha…login to view the rest of this post

The bike was a stolen recovered so not sure if the left is there I cant seem to see it. Does it go over the battery under the main seat? Thanks for yo…login to view the rest of this post

I have been told that they are restricted in is as well but not sure if this is true

Sorry for the late reply yes the cylinders are the other way around from US to EU.
US cylinder 4 3 2 1
EU cylinder 1 2 3 4
That might be the wrong way round but its opposite
So a EU bike with a US ecu the plug leads are the wrong way around so it will not start just backfire

After rebuilding my bike I have a rubber left called a patch 6 the manual doesnt help with where it goes at all just want to make sure it's nothing ma…login to view the rest of this post

And yes easy start not a good idea I was just trying to see if I had a fuel problem or spark turns out it was spark that's why it wouldn't start with anything

Managed to get the bike running turns out it was a us ecu I have bought so swapped the plug leads round and it fired straight up, wish the guy had mentioned that but never mind. Found a dodgy thread on one of the plugs now so the head is off all fixed just need to put it back together, thanks for al...

To be honest that is one thing I havent done I have looked at the fuel in a cup and looked good but I will put some fresh in and try that. I would have thought it would try fire with some easy start down the butterfly, but I only squirted a touch in just to try it, I dont think it does them any good...

Great thanks for the help again I do really appreciate it as I seem to be struggling a little now. I will be checking the wiring to the clocks see where that gets me. I will keep you all updated

Dont know about the TPS other than doing the diag mode on the clocks and looking at the display as I throttle it, that's registering, Suppose that could just be the signal going to the TPS not the response. It does the butterfly cycle when you turn on the ignition.

Thanks guys. I think I will concentrate on other parts not the alarm no wires are cut I cant find any plugs close to them to plug into. I have a spark and have lifted the tank taken off the fuel pipe flicked the key and fuel comes out at some pressure not exact on the pressure but it squirts out. I ...

Thanks for that steve r1 made me feel better I thought I had damaged something using the red key. I have had an r6 in the past and I'm sure that I have used the red key before. I have some clocks coming that the lock set came off I will fit those, get a new battery, then try the full throttle techni...

Would it make a difference if the alarm plugs under the seat are not connected to anything? It had an alarm fitted but was all green in the fuse so guessing it hadn't been used for a while. Do these plugs need plugging into anything?

Another thing I did not sure if it was a good idea but after i had fitted the lock set and ecu tried tried and tried starting it with the black keys. Then tried with the red and someone told me I will have damaged the programming in the ecu using the red key. I'm not too sure what to believe with th...

No I havent tried it with the throttle funny open but have tried with it half open. Doesnt do much, I have tried some easy start down the throttle body that doesnt do anything either makes me think there is no spark but I checked the spark only on one cylinder and it was great I would think that wou...

Hello new to the forum hope everyone is well. I have recently bought a stolen recovered 5vy r1. The locks were damaged so I changed the lock set with immobiliser and ecu. I have checked the lean sensor cam sensor, fuel pump with ignition all ok, Replaced the spark plugs checked the spark on cylinder...