www.YamahaR.co.uk

I haven't posted for a while so a quick update on my trip. I had pneumonia in May, and we decided to postpone the trip until August - September. All w…login to view the rest of this post

Just curious, are diesel trucks and buses allowed in the ULEZ zones?

I am in a similar situation with fairing damage to my 4xv. The insurance company may write it off as new parts are not available. However, the bike ha…login to view the rest of this post

Welcome, Scott.

I'm sure you'll enjoy it more with new bars. My clearance problem is on the right, where careful adjustment is required to avoid the brake M/C hitting…login to view the rest of this post

I believe Moise said he dismantled and cleaned the switch itself ....... I was just wondering if it would be possible to by pass the stop switch ( re…login to view the rest of this post

Tapatalk hasn't been loading the forum for about a week. Message is Network error, please try again later. (get_config)

Have you checked all the other switches? Sidestand etc? Don't know why, but it doesn't sound like the kill switch to me. Have you tried shorting the …login to view the rest of this post

R15UTT wrote:4XV in profile. Joined April 4 2023 .

[emoji106]

Sent from my SM-S906E using Tapatalk

The contacts are spotless! But I suspect it's more to do with wear as you suggest. Maybe a previous owner used the kill switch all the time? The clutc…login to view the rest of this post

What is the bike?

Sent from my SM-S906E using Tapatalk

I have had occasional problems with this, which culminated in not being able to restart the bike for an hour after I used it in a service station. I s…login to view the rest of this post

https://i.postimg.cc/kVJR40ms/F1-C08303-8-F7-A-49-CA-A313-190-FFC5183-C6.jpg Having just got my 4xv back from having conversion done I thought I’d po…login to view the rest of this post

Sorry guys. Temperature increases by about 12 degrees C every 50 seconds whilst stationary. Fans kick in at 105. It never gets that high unless I pus…login to view the rest of this post

Great idea! When I put that thing back in-place I knew the same procedure is going to be required next time so i'll try the anchor bolt trick next ti…login to view the rest of this post

[emoji106] I have done the linkage on my bike (4xv). It's a different design and easier to work on. The bearings have a plastic cage that seemed to be…login to view the rest of this post

Do you need to replace the bearing, or are you just lubing it? That bearing does not rotate far, so if the seals are in good condition it should be OK…login to view the rest of this post

BTW I have ordered a length of Tygon tubing ...... Inside diameter is quoted at 6.3 mm , slightly smaller than the 7 mm or so the standard Yamaha app…login to view the rest of this post

Maybe an alternative to extending the hose would be extending the bracket? The reservoir needs to be above the M/Cyl. The problem with a bracket is t…login to view the rest of this post

I understand they swapped the complete gearbox. But I thought it only the 2015 model year?

Sent from my SM-S906E using Tapatalk

You'd just need a length of Tygom for the fluid reservoir. Drilling the holes would be easy enough with a drill press. The higher bars really do make…login to view the rest of this post

You'd just need a length of Tygom for the fluid reservoir. Drilling the holes would be easy enough with a drill press.

The higher bars really do mak…login to view the rest of this post

How quickly does it increase? And is the fan working OK?

Sent from my SM-S906E using Tapatalk

It is possible that the current USB driver does not support the older hardware. I encounter this at work occasionally with older instrumentation. I'd…login to view the rest of this post

Which bars are you fitting? My bike came with a set fitted which were made locally (NZ). They fit on the fork tubes and so can be adjusted for height.…login to view the rest of this post

www.YamahaR.co.uk

Search found 8673 matches

Re: Moise is coming to the UK!

Re: Just wondering about ULEZ

Re: Tyre weld vs breakdown mechanic

Re: Hello everyone.

Re: Still around

Re: Kill switch

Tapatalk not connecting

Re: Kill switch

Re: Rebuild

Re: Kill switch

Re: Rebuild

Kill switch

Re: 98 r1 with 5vy front and swing arm

Re: Overheating issue

Re: Seized rear linkage collar

Re: Seized rear linkage collar

Re: Seized rear linkage collar

Re: Still around

Re: Still around

Re: 2015-2016 gearbox recall

Re: Still around

Re: Still around

Re: Overheating issue

Re: Dyno-Jet Power Commander(405-310) Fitting Instructions 5PW

Re: Still around