www.YamahaR.co.uk

It is possible that the current USB driver does not support the older hardware. I encounter this at work occasionally with older instrumentation.

I'…login to view the rest of this post

The 2015 red and white colours are not like the 98 R1, and they did not come with a red seat. Is it an aftermarket fairing? You'd want to get it prett…login to view the rest of this post

Try messaging Kylezx7r. He should be able to help.

Sent from my SM-S906E using Tapatalk

Curiosity got the better of me and I looked in the service manual. Yamaha show lithium grease for the outer one, but no lubricant for the one that go…login to view the rest of this post

Ah, I understand what happened now!

I didn't use any lubricant on the O-ring and it stayed in place. Vaseline is probably a bit slippery - I use …login to view the rest of this post

just changed the "o" rings on the coolant pump pipe, unfortunately , Ive now got to flush the engine. On pulling the pipe back out there was no "o" r…login to view the rest of this post

ThunderboltFMF wrote:Trying to work out what the difference is between my Bitsa and my standard bike.

Not sure why someone would fit 5jj yokes to a 5pw…login to view the rest of this post

From here: https://litetek.co/Guide_USD_ForkDatabase.html

5pw: 25 mm offset
5jj and 4xv: 35 mm offset…login to view the rest of this post

Hello, I was wondering if you could help me? I need to know if the newer tail section from the R6 (double round lights) will fit onto my 2000 YZF600. I would be very grateful if someone could answer this as I am not getting a reply from anyone. Thanks Unless the part numbers are the same (3 digit m...

Yes, it works now!

The interesting thing is I never came close to running out of petrol without the low fuel warning, as I made sure to fill up bef…login to view the rest of this post

r1chaz wrote:no pc3 as far as I can see, the exhaust can has titanium stamped on and including the down pipes very light.

Sounds like you have a full s…login to view the rest of this post

ok, second Q the fuel pump isnt working,, been stood for 5 years and fuel gone off. Ive bought one of the new rebuild pumps from ebay but its longer …login to view the rest of this post

working on putting the track bike back together. 2002 5PW the exhaust system is very light but seems to have had the EXUP valves removed. was this a …login to view the rest of this post

https://m.gpone.com/en/2023/05/23/sbk/t ... newed-with

Sent from my SM-S906E using Tapatalk

…login to view the rest of this post

I expect his test on the M1 put him off riding MotoGP for Yamaha!


Sent from my SM-S906E using Tapatalk

An update on this. I bought a new can from AliExpress, which was only a few dollars but took weeks to arrive. It wasn't a high priority job, and didn'…login to view the rest of this post

Result, you're lucky the motor survived that. Definitely worth changing the thermoswitch.

Sent from my SM-S906E using Tapatalk

My rad fan's called time , anybody found something to suit or just gone for second hand . Thanks in advance Colin. If it’s the electric motor that’s …login to view the rest of this post

New Brembo Serie Oro discs fitted. Unless you look hard, they're quite similar to OE.


Sent from my SM-S906E using Tapatalk

…login to view the rest of this post

I have fitted a new set of front discs and had to reuse the old bolts as the new ones I'd ordered hadn't arrived. The old bolts were in good condition…login to view the rest of this post

That isn't making sense. Even if you didn't drain all of the oil, I'm not sure how it could be 2 litres over?

Did you drain and refill to remove the…login to view the rest of this post

On the 4xv one is a drain from under the fuel cap and the other vents the tank through the cap. The R6 may be different though?

Sent from my SM-S906…login to view the rest of this post

If you look inside the tank, you should be able to see the vent lines and figure out which is which.

Sent from my SM-S906E using Tapatalk

…login to view the rest of this post

2002r1jon wrote: ↑Wed Apr 26, 2023 8:50 pm

jompy wrote: ↑Thu Apr 20, 2023 10:17 am
Fucking

Bit Rich.......

I thought Jompy was quite restrained!…login to view the rest of this post

Kylezx7r wrote:

Moise wrote: ↑Tue Apr 18, 2023 9:08 pm

jompy wrote: ↑Tue Apr 18, 2023 12:37 pm Welcome back big lad [emoji106]
I still need to send tho

…login to view the rest of this post