Page 1 of 1

abs removal 2015 r1

Posted: Tue Mar 13, 2018 12:19 pm
by Dig1414
Hello, I hope there's somebody who can help with this problem. I recently purchased a abs delete module from velox racing, to fit it the pump has to be removed, the problem is the module forms part of the under tray and removing it will leave a large hole. Doe's anybody know of a company that sells a sealed unit, I've done quite a bit of searching on line and came across a YouTube posting from sportsbike track gear were there doing the same project, and on there bike it's a sealed unit. The problem is I can't find anybody who has one, I've tried a number of race bodywork people, Yamaha dealers, and velox racing, if anyone knows of a company that sells the under trays or has done a similar project any reply would be greatly appreciated, thanks.

Re: abs removal 2015 r1

Posted: Tue Mar 13, 2018 2:52 pm
by r1Mike
I think we may have chatted on email today, CRC do a race seat unit and the undertray may fit, you could also try hotboddies in the USA

I will keep looking

Re: abs removal 2015 r1

Posted: Sat Mar 31, 2018 4:36 pm
by PICOB
Is it a standard rear subframe and undertray? I've just taken mine out and the only hole left is the locating pin on the bottom of the pump which isn't large as such and can be easily bunged up. Have you removed too much by any chance?