New member in gloucestershire

New to the forum? Then say hello here
Post Reply
phill rg500
Newbie
Posts: 3
Joined: Tue Sep 17, 2019 9:05 pm
Bike Make & Model: R1 2001
Has thanked: 0
Been thanked: 0

New member in gloucestershire

Post by phill rg500 »

Hi all,
just though I would say hello,
I have just bought a 5JJ R1 in red and white quite standard bike, with a race can, had to take the bike back to the shop as had a bad misfire and carb flooding, so just rode out today down to Bristol and she went well that problem was fixed,
However just out of curiosity are these engines noisy as there is quite some winning going on,
the power valve has apparently been locked in the open position which I would rather get it back in operation.

Anyway three is a bad scuff on the red tail unit so looking for a very good one incase anyone has one for sale.
Hopefully I will be able to contribute in time to the site,

Regards Phill


User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby
Has thanked: 46 times
Been thanked: 38 times

Re: New member in gloucestershire

Post by jompy »

Welcome in Phil
Yes they can be a tad noisey , you have the yama-tic which sounds like the cam chain but some say it could possibly be the
valves and then you have the clutch rattle , usually if you pull the clutch leaver in the noise goes , it's nothing to worry about 👍
Enjoy the 5jj they're a great bike
User avatar
polar
Donator
Donator
Posts: 2642
Joined: Thu Dec 14, 2017 7:48 am
Bike Make & Model: FJR 1300, MT10SP
Has thanked: 0
Been thanked: 0

Re: New member in gloucestershire

Post by polar »

Hi Phil and welcome to the forum, good bunch of guys and girls here.

The engines are noisy but better to find someone who will have a listen for you just to make sure as the whining you describe is not something i remember.

Post some pics of your new bike and enjoy your 5JJ mate.
phill rg500
Newbie
Posts: 3
Joined: Tue Sep 17, 2019 9:05 pm
Bike Make & Model: R1 2001
Has thanked: 0
Been thanked: 0

Re: New member in gloucestershire

Post by phill rg500 »

Hi Chaps,
Thanks for the tips they are all very welcome,
Yes there is a clutch issue which goes when the clutch lever is pulled in, so easy fix, new steels and friction plates and I guess theres a trust bearing in there somewhere......
yes I may get there bike over to Frazers in glos for a check over as she has 1k miles warranty from another bike dealer which I bought it from.
Thanks again.
she does pull well

Regards Phill
User avatar
Horus-222_R1
Donator
Donator
Posts: 2771
Joined: Mon Aug 22, 2016 2:59 pm
Bike Make & Model: R1 - 14B/E
Location: Winchester
Has thanked: 1 time
Been thanked: 2 times

Re: New member in gloucestershire

Post by Horus-222_R1 »

Welcome in Phil.
Enjoy the forum and the new ride. 👍🏽
2012 & yellow - must be one of those anni's.
User avatar
Steve R1
Donator
Donator
Posts: 13575
Joined: Fri Dec 06, 2013 9:28 pm
Bike Make & Model: R1M
Location: Warrington Cheshire
Has thanked: 0
Been thanked: 1 time

Re: New member in gloucestershire

Post by Steve R1 »

Welcome to the forum Phil. Post up some pics of your new pride and joy. Being Red she will be as fast as fook , which is faster than the blue -almost as fast as fook R1’s, though the blue ones are fast enough for the blue riders.. ah Clarky

Seriously welcome to our biking community, the guys n gals are very knowledgeable and helpful. Any questions, just ask, there are no daft questions

Welcome

Stephen


Sent from my iPhone using Tapatalk
Dogs leave paw prints in our hearts
User avatar
R1Clarky
Donator
Donator
Posts: 6445
Joined: Mon Sep 08, 2014 11:42 am
Bike Make & Model: Yamaha R1 5JJ
Location: Leicestershire
Has thanked: 0
Been thanked: 0

Re: New member in gloucestershire

Post by R1Clarky »

welcome in phil, great bikes the 5jj(even if its the slower red one ) as steve says get some pics up when ya can

Sent from my SM-N960F using Tapatalk

Treat everyone with respect unless they prove themselves to be Unworthy :-)
User avatar
Moise
Donator
Donator
Posts: 8889
Joined: Wed Jul 09, 2014 8:19 am
Bike Make & Model: Yamaha R1 4xv
Location: Auckland, New Zealand
Has thanked: 59 times
Been thanked: 59 times

Re: New member in gloucestershire

Post by Moise »


phill rg500 wrote:Hi Chaps,
Thanks for the tips they are all very welcome,
Yes there is a clutch issue which goes when the clutch lever is pulled in, so easy fix, new steels and friction plates and I guess theres a trust bearing in there somewhere......
yes I may get there bike over to Frazers in glos for a check over as she has 1k miles warranty from another bike dealer which I bought it from.
Thanks again.
she does pull well

Regards Phill
Welcome Phil. Great people on this forum, enjoy.

The clutch noise isn't from wear. I understand that it's gear chatter from the stacked box. Syncing the carbs can help.

Some gear pairs whine more than others.

I was a bit freaked out by the noises when I bought mine, but found a clip from a 4xv on YouTube which sounded just like mine. And it still sounds the same after 5 years and 25,000 miles!

Thicker oil, 15W-50, quietens the tick, but doesn't do much for the clutch and gearbox noises.

I've found the best solution to be a louder exhaust. :)






Last edited by Moise on Sun Sep 22, 2019 10:11 am, edited 2 times in total.
"You don't get slower with age, you just get more cautious." Michael Rutter

1999 4xv in blue
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby
Has thanked: 46 times
Been thanked: 38 times

Re: New member in gloucestershire

Post by jompy »

Also the clutch basket has 5 springs in it and these chatter , people have fitted new baskets to only find they're just as bad nt long after
Post Reply