Bike not running correctly.
-
- Lurker
- Posts: 6
- Joined: Sun Nov 08, 2020 3:40 pm
- Bike Make & Model: 2004 R1
- Has thanked: 0
- Been thanked: 0
Bike not running correctly.
Hi, I have an 2004 R1 with only 13.000 miles. Anyway having owned this bike for 12 years It now seems I have a problem with the motor going on to 3 cylinders when idling..but clears when warmed up.
Thanks in advance.
Thanks in advance.
- jompy
- Moderator
- Posts: 19692
- Joined: Wed Jul 03, 2013 8:24 pm
- Bike Make & Model: 98 4xv Half-One
- Location: Derby
- Has thanked: 46 times
- Been thanked: 39 times
Re: Bike not running correctly.
Welcome in Phil
could be a number of things from HT lead braking down or coil pack ( i believe the 5v y has one on each plug ) to wiring
Hope someone can shed more light for you
- polar
- Donator
- Posts: 2642
- Joined: Thu Dec 14, 2017 7:48 am
- Bike Make & Model: FJR 1300, MT10SP
- Has thanked: 0
- Been thanked: 0
Re: Bike not running correctly.
Have you done a throttle body sync? If its clears when hot? Are you losing any coolant? Have you tried some millers fuel treatment? Do you have a power commander fitted?
Sent from my SM-G903F using Tapatalk
Sent from my SM-G903F using Tapatalk
-
- Lurker
- Posts: 6
- Joined: Sun Nov 08, 2020 3:40 pm
- Bike Make & Model: 2004 R1
- Has thanked: 0
- Been thanked: 0
Re: Bike not running correctly.
No throttle body sync - Haven't tried.millers .fuel treatment, yes I have PC111.
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
- polar
- Donator
- Posts: 2642
- Joined: Thu Dec 14, 2017 7:48 am
- Bike Make & Model: FJR 1300, MT10SP
- Has thanked: 0
- Been thanked: 0
Re: Bike not running correctly.
Okay get some millers but disconct the power commander and see how it runs. If ok then millers an throttle body sync. Good luck let us me know how you get on.R1 Phil wrote:No throttle body sync - Haven't tried.millers .fuel treatment, yes I have PC111.
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
Sent from my SM-G903F using Tapatalk
- r1Mike
- Site Admin
- Posts: 5707
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Has thanked: 33 times
- Been thanked: 19 times
- Contact:
Re: Bike not running correctly.
Check plugs then leads.
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels
2006 R1 - ProjectBike
1998 R1 - Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
All parts supplied by us - http://www.veloxracing.com
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels
2006 R1 - ProjectBike
1998 R1 - Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
All parts supplied by us - http://www.veloxracing.com