morning, new to the forum as Ive got two track bikes needing rebuilding. Both 2002, the R6 is a pure track bike, no frame number, Maxton front and rear, the R1 is un registered but Ive checked and has the possibility that might be able to regain.
Both are in pieces being checked through as the tanks are rusty.
will be back with questions later
oh, the Avon town in the subject line... thats Melksham, Wilts. unfortunately the factory (Cooper/Avon/Bridgestone) is closing down . putting a stop to our supply of tested only cheap tyres
morning from Avon town
-
- Newbie
- Posts: 1
- Joined: Sat Jun 10, 2023 9:52 am
- Bike Make & Model: Yamaha YZF600
- Has thanked: 0
- Been thanked: 0
Re: morning from Avon town
Hello, I was wondering if you could help me? I need to know if the newer tail section from the R6 (double round lights) will fit onto my 2000 YZF600.
I would be very grateful if someone could answer this as I am not getting a reply from anyone. Thanks
I would be very grateful if someone could answer this as I am not getting a reply from anyone. Thanks
- Moise
- Donator
- Posts: 8902
- Joined: Wed Jul 09, 2014 8:19 am
- Bike Make & Model: Yamaha R1 4xv
- Location: Auckland, New Zealand
- Has thanked: 60 times
- Been thanked: 61 times
Re: morning from Avon town
Unless the part numbers are the same (3 digit model code and the first number), it's unlikely.Moldwarp wrote:Hello, I was wondering if you could help me? I need to know if the newer tail section from the R6 (double round lights) will fit onto my 2000 YZF600.
I would be very grateful if someone could answer this as I am not getting a reply from anyone. Thanks
Do they have the same frame?
Sent from my SM-S906E using Tapatalk
"You don't get slower with age, you just get more cautious." Michael Rutter
1999 4xv in blue
1999 4xv in blue
-
- Been Here a While
- Posts: 25
- Joined: Sun May 28, 2023 6:47 am
- Bike Make & Model: R1 2002 5PW
- Has thanked: 4 times
- Been thanked: 1 time
Re: morning from Avon town
no it wont fit but yes it could.
Ive got a 5eb 2000 and the 5sl 2003 wont fit.
unless you have welding abilities.
youngest has fitted a gsxr600 rear sub frame to his 600 bandit, takes a lot of drawing, metal work, cutting, welding, then finishing and rewiring and fixing of lights and indicators
Ive got a 5eb 2000 and the 5sl 2003 wont fit.
unless you have welding abilities.
youngest has fitted a gsxr600 rear sub frame to his 600 bandit, takes a lot of drawing, metal work, cutting, welding, then finishing and rewiring and fixing of lights and indicators