www.YamahaR.co.uk

When I said fuel I meant have you got fuel tomthe injector and are they spraying fuel into the motor.
Its spark or fuel.

The obvious are
Have you got a spark
Have you got fuel.

How fast is it turning over. The battery on these are small and the cross plane needs to spin q…login to view the rest of this post

Never been a fan of Bridgestone. Back of my blade come around on Bt54 ( I think. It was a long time ago,) and had the front tuck while running in my k…login to view the rest of this post

https://photos.app.goo.gl/t5FBgaXisqJuYeZeA
not bad copies

They look fine, Chinese? I fitted Brembo OEM discs, Serie Oro. They were a good price dire…login to view the rest of this post

https://photos.app.goo.gl/t5FBgaXisqJuYeZeA
not bad copies

The pads I have, Brembo SR, certainly work better when they are hot, but not to the extent you describe. I doubt it's the discs as wet and dry follow…login to view the rest of this post

Has some will now I got the 4xv back on the road after 16 years. I have been having a problem with front brake feel. When she was parked up it had EBC…login to view the rest of this post

R14XV wrote: Fri Jun 13, 2025 4:10 pm Mine is a 98 and according to my local Yamaha dealer, high mileage at 30K miles !

Chap at brands last week on a blue 4xv 46k miles

Hi.
Got mine back on the road after 15 and a bit years sat in the garage.
I have had to clean the tank. The carbs have been off numerous times until I got it running acceptable.
viewtopic.php?p=295244#p295244

viewtopic.php?t=21802

Swapped out to an ohlins and it came with a little plug in doda

The trip meter resetting is still a riddle to me.
I've got to a situation now where it saves trip for 4 or 5 cycles of the ignition then it resets.
So l…login to view the rest of this post

Ok
1) my fuel pump clicks when turning ignition on to prime the pump. Turn ignition off and back on as many times as you like and pump clicks every tim…login to view the rest of this post

Is this working
https://photos.app.goo.gl/KLEiAqoQ1p5manty6

( hope the link works ) Carbs off again and blown through. Mixture screws at 3.5 turns out. Stock brass. Needle raised 1/2 a Clip with a shim.
Think I…login to view the rest of this post

Here we go Duncan. ( hope the link works ) Carbs off again and blowen through. Mixture screws at 3.5 turns out.
Think Ill say enough messing for toda…login to view the rest of this post

Ok plug cap arrived. Out for a quick 67 mile loop. Trip milage still being lost once ignition turned off.
Tickover still jumping about. I know carbs ar…login to view the rest of this post

That's weird, not sure what would cause the memory to fail the second time the key is turned on.

My experience has been similar to Malr1, that the h…login to view the rest of this post

That's weird, not sure what would cause the memory to fail the second time the key is turned on.

My experience has been similar to Malr1, that the hig…login to view the rest of this post

They can only adjust air or fuel. If they are between the slide and cylinder it must allow more fuel from the floats. If it between filter and slide…login to view the rest of this post

They can only adjust air or fuel. If they are between the slide and cylinder it must allow more fuel from the floats. If it between filter and slide i…login to view the rest of this post

Checked the wires and that one is the only one that's constantly live. It's red with green trace as per manual wiring diagram into the connector but r…login to view the rest of this post

Ok not solved.
Have now removed the wire from the BWC and put new ends terminal on and bypassed the BWC with new connections.

https://i.postimg.cc/XrP2…login to view the rest of this post

After yesterday's 123 miles this is the amount of contamination cleaned out of the engine breather pipe. Pretty clean really.
https://i.postimg.cc/K1N…login to view the rest of this post

As per title.
The screws look to be engine side of the slide which would suggest they are adjusting petrol.
Were as if they are airbox side of the slide…login to view the rest of this post

Check wires from the backup fuse to BWC and got continuity. Check through the connector and no continuity. Turns out that this terminal is the one tha…login to view the rest of this post

www.YamahaR.co.uk

Search found 1742 matches

Re: 2016 2cr will not start following rebuild

Re: 2016 2cr will not start following rebuild

Re: Heatwave tyre grip

Re: Front brake help / suggestions

Re: Front brake help / suggestions

Re: Front brake help / suggestions

Front brake help / suggestions

Re: 4XV

Re: 4XV

Re: Steering damper removal

Re: Trip meter to zero

Fuel pump and dash circuit board.

Re: Air/ Mixture screws

Re: Air/ Mixture screws

Re: Trip meter to zero

Re: Trip meter to zero

Re: Trip meter to zero

Re: Trip meter to zero

Re: Air/ Mixture screws

Re: Air/ Mixture screws

Re: Trip meter to zero

Re: Trip meter to zero

Re: Engine breather

Air/ Mixture screws

Re: Trip meter to zero