www.YamahaR.co.uk

r1brizz

It was mine from new , had it less than 6 months- i traded it in for an R1M instead of having the gearbox recall done.

r1brizz

You can try my file, was mapped with a standard filter and link pipe, but your own risk !

If you want the best from it then need to go to a dyno to get…login to view the rest of this post

r1brizz

I normally chop in every 2 years, so this would be the time to order the next one.

I just don't like the colour scheme, and only a down blipper, that F…login to view the rest of this post

r1brizz

Very much the same as the set i got in the summer.

As its an R1M, and being super picky, i decided not to fit them after close inspection.
The amount of…login to view the rest of this post

r1brizz

The Firmware is different on the R1M dash, reason for a different part number.

The firmware can be updated, but very few dealers can do it, so basica…login to view the rest of this post

r1brizz

I'm 185-190lbs - track day baseline

SagFront 30-35 , Rear 27-30

A1, Fr COM +1, Fr REB -5, Rr COM +1, Rr REB -5
A2, +1, -5, +1 , -5
M1, 14,14,12,11
M…login to view the rest of this post

r1brizz

Nothing in the TBW tables to suggest this , but the traction control could be kicking in with wheel slip on the roller.

Turn all the electronics off …login to view the rest of this post

r1brizz

Funny enough the few times I have brought a brand new bike ( 3 in the last 5 years ), i give them my weight and told them set the sag as part of the P…login to view the rest of this post

r1brizz

Offset firing, means you will never counter balance the shaft perfectly in all load cases.

r1brizz

Cheers, its the same bloke.

r1brizz

Cheers was just about to hit the buy button on a set, but wasn't sure how the R1M silver tank would look with the Blue, looks a lot better than I thou…login to view the rest of this post

r1brizz

Pretty rare , I been waiting for a front nose panel to pop up for a while.

r1brizz

True that the R&D of the bigger guys with the 'on battery' systems reduces the risks, and never buy a 'cheap' LiPo.

Having said that a fault in the bik…login to view the rest of this post

r1brizz

Yes it true that a LiPo will 'store' more energy than the same sized lead/acid, but if you do go for LiPo research and enter the world of a LiPo with …login to view the rest of this post

r1brizz

Narrow band
Wideband is used by autotuning piggybacks or ECU's like Motec for full closed loop control.
Unless you turn off the narrowband control using…login to view the rest of this post

r1brizz

Not knocking it - ign mapping by gear and fuel/ign by cylinder - so a very capable tool.

Just missing the gear offset fuel tables, very minor, but ni…login to view the rest of this post

r1brizz

Its a shame that FTECU doesn't allow for gear by gear fuel mapping

r1brizz

The 'linked' TPS auto tuning and built in smoothing feature looks a step beyond PCV, so the self learning should be a lot better.

r1brizz

As far as I know the Motoholder intake doesn't fit with road fairings.

r1brizz

Be good if there was an upgrade option for people with DJ Auto tune and FT bike harness, a kit without the O2 sensor.

r1brizz

So do they turn up with the van, quick look at the bike , with a sharp intake of breath start to point out any minor marks and wear with a 'can only g…login to view the rest of this post

r1brizz

Could be a few deciding the uncertain outlook from the political fall out from Brexit, and the fact the trade in must be good, its time to consolidate…login to view the rest of this post

r1brizz

Yes but at 17-500 to 19-000 !!!!

I would prefer a nice black engine one in the spring, if I didn't already have a 2016 model.

r1brizz

Well the biggest difference will be some kind of carbon filter on the fuel tank vent system.

The bike already has OBD, and closed loop idle control.
…login to view the rest of this post

r1brizz

we got speed cameras on police motorbike round here, talking to one of them, they can easily read you from 2 miles away.

They do park up on the long …login to view the rest of this post

www.YamahaR.co.uk

Search found 295 matches

Re: Who's got it

Re: Pcv

Re: 2018 R1M

Re: Chinese Fairing experience

Re: Will an R1 dash work on a R1m

Re: R1M Suspension Settingsings

Re: anyone had 2017 R1m on the Dyno ??

Re: Shock removed r1m 17

Re: Engine Vibration?

Re: Chinese fairings

Re: Chinese fairings

Re: R1M fairing value

Re: Battery

Re: Battery

Re: O2 sensors?

Re: Looky here what I got

Re: Looky here what I got

Re: Looky here what I got

Re: 2015 r1 dyno 170bhp

Re: Looky here what I got

Re: we buy any bike

Re: 2017 r1 m any body ordered one

Re: 2017 r1 m any body ordered one

Re: 2017 R1 differences

Re: Camera van