Lurker finally says hi
-
- Been Here a While
- Posts: 30
- Joined: Sun Aug 02, 2015 6:14 pm
- Bike Make & Model: R1
Lurker finally says hi
Afternoon all,
Thought it was about time I said hello on here so here I am.
I've been on TDR for years (made famous by my Vagisil R1) but discovered this place properly recently when doing some digging on YEC bits.
Currently own a 2004 R1 with an ex phase one motor in it that I've had for the last 6 years or so and love to bits. However I was recently looking at buying a slipper clutch for it, man maths took over and I ended up buying kyles very tasty 14b from him lol man maths at its finest hehe
Probably met a few of you at the track over the years as I'm pretty friendly but always pop over to say hi if you see me there =)
Thought it was about time I said hello on here so here I am.
I've been on TDR for years (made famous by my Vagisil R1) but discovered this place properly recently when doing some digging on YEC bits.
Currently own a 2004 R1 with an ex phase one motor in it that I've had for the last 6 years or so and love to bits. However I was recently looking at buying a slipper clutch for it, man maths took over and I ended up buying kyles very tasty 14b from him lol man maths at its finest hehe
Probably met a few of you at the track over the years as I'm pretty friendly but always pop over to say hi if you see me there =)
- Chappo
- Donator
- Posts: 2378
- Joined: Sun Oct 11, 2015 3:09 pm
- Bike Make & Model: R1 2016
- Location: Leicester
Re: Lurker finally says hi
Finally
Hi and welcome mate,
Hope you enjoy the R1 it was a stunner,
Hi and welcome mate,
Hope you enjoy the R1 it was a stunner,

2016 R1
- R1Clarky
- Donator
- Posts: 6445
- Joined: Mon Sep 08, 2014 11:42 am
- Bike Make & Model: Yamaha R1 5JJ
- Location: Leicestershire
Re: Lurker finally says hi
welcome m8 get stuck in and enjoy the forum 
an R1 a day keeps insanity away

an R1 a day keeps insanity away

Treat everyone with respect unless they prove themselves to be Unworthy 

- petepassion
- Donator
- Posts: 4437
- Joined: Sun Mar 09, 2014 8:09 pm
- Bike Make & Model: YamaharZX6R
- Location: Portsmouth
Re: Lurker finally says hi
Hi, welcome to the forum, that's a cracking 14b you got at a very good price
Pete

Pete

...I'm Just a passenger
Re: Lurker finally says hi
Great, this is going to be like when you broke up with an ex who you were still in love with and them bump into her with another man in every pub.
Welcome to the forum Tom, now do the sensible thing and sell me it back.
One week later and I would have been keeping that bike as my luck changed with work but that's life
Welcome to the forum Tom, now do the sensible thing and sell me it back.
One week later and I would have been keeping that bike as my luck changed with work but that's life
- LOCKE
- Donator
- Posts: 5064
- Joined: Sun Jan 13, 2013 5:43 pm
- Bike Make & Model: 2009 YZF R1 14B
- Location: Glasgow
Re: Lurker finally says hi
Welcome in mate.
Colin
Colin

14B. Enough Said.
HEL Pirelli Akrapovic Brembo Gilles Tooling Pro-Bolt GBRacing PCV Renthal K&N
Re: Lurker finally says hi
Well I happen to know that it hasn't been all bells and roses for him, he took the bike away for a euro trackday and it ran like sh!t.jompy wrote:Welcome in Tom
Can't fault you for stealing kyles baby away from him
So not the best start for him but hopefully sorted now
- jompy
- Moderator
- Posts: 19692
- Joined: Wed Jul 03, 2013 8:24 pm
- Bike Make & Model: 98 4xv Half-One
- Location: Derby
Re: Lurker finally says hi
Interesting , can't be much though as it ran like a dream for youKylezx7r wrote:Well I happen to know that it hasn't been all bells and roses for him, he took the bike away for a euro trackday and it ran like sh!t.jompy wrote:Welcome in Tom
Can't fault you for stealing kyles baby away from him
So not the best start for him but hopefully sorted now
-
- Been Here a While
- Posts: 30
- Joined: Sun Aug 02, 2015 6:14 pm
- Bike Make & Model: R1
Re: Lurker finally says hi
Awesome shucks, you're making me feel bad kyle, I promise you can have first refusal if I ever sell it.
And yes, I had some pretty chappy running issues and only got about ten laps in on day one at Brno last week, thankfully took my old bike with me as despite my best efforts I couldn't resolve the issue at the track. Turned out to be a dodgy sensor/relay and a boat load of crap in the tea bags filter in the fuel pump. Kyles been ace though and already sorted me out with new replacements so fingers crossed it's all sorted now, going to try and get a day booked next week to make sure, then my old baby will be up for sale.
And yes, I had some pretty chappy running issues and only got about ten laps in on day one at Brno last week, thankfully took my old bike with me as despite my best efforts I couldn't resolve the issue at the track. Turned out to be a dodgy sensor/relay and a boat load of crap in the tea bags filter in the fuel pump. Kyles been ace though and already sorted me out with new replacements so fingers crossed it's all sorted now, going to try and get a day booked next week to make sure, then my old baby will be up for sale.
Re: Lurker finally says hi
Hi tom welcome so ur the one who bought it / stole it
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Lurker finally says hi
Good speaking to you on the phone yesterday Tom, glad you have broken silence to gloat about buying Kyles stunning bike 
Mike

Mike
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
- Been Here a While
- Posts: 30
- Joined: Sun Aug 02, 2015 6:14 pm
- Bike Make & Model: R1
Re: Lurker finally says hi
Thanks for the welcome peeps
Got Donington Park booked up for Tuesday next week, might even try and squeeze a cadwell in as well while I'm out in the van, can't wait to try it out properly.
Got Donington Park booked up for Tuesday next week, might even try and squeeze a cadwell in as well while I'm out in the van, can't wait to try it out properly.
- Bub
- Site Admin
- Posts: 12669
- Joined: Tue Nov 27, 2012 12:08 pm
- Bike Make & Model: S1000rr R1 GSX750
- Location: Chelmsford
- Contact:
Re: Lurker finally says hi
Welcome to the forum pal

SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP
-
- Been Here a While
- Posts: 161
- Joined: Sat May 28, 2016 11:10 am
- Bike Make & Model: R6, 1190A, cbr400rr
- Location: Southport
Re: Lurker finally says hi
Wow, this bike sounds amazing, love to see a pic!
Welcome fella.
J
Welcome fella.
J
Yamah R6 - 2007, just right as it is (SC can makes a nice noise)
KTM 1190 - All the extras, full bashplate and bars, Akro, and the wife likes it too...
2013 R1 - 14b - Gilles, decat, modified cans, asv's, 50th anniversary - Lorenzo paint job
Two Brothers cans and some carbon guards (now gone)
KTM 1190 - All the extras, full bashplate and bars, Akro, and the wife likes it too...
2013 R1 - 14b - Gilles, decat, modified cans, asv's, 50th anniversary - Lorenzo paint job
Two Brothers cans and some carbon guards (now gone)
Lurker finally says hi
Here you gojayj wrote:Wow, this bike sounds amazing, love to see a pic!
Welcome fella.
J


The fact I'm in front of PJC is irrelevant
Sent from my iPhone using Tapatalk
-
- Been Here a While
- Posts: 161
- Joined: Sat May 28, 2016 11:10 am
- Bike Make & Model: R6, 1190A, cbr400rr
- Location: Southport
Re: Lurker finally says hi
Ok, I'm a little bit impressed
Ermmmm, maybe a lot

Ermmmm, maybe a lot

Yamah R6 - 2007, just right as it is (SC can makes a nice noise)
KTM 1190 - All the extras, full bashplate and bars, Akro, and the wife likes it too...
2013 R1 - 14b - Gilles, decat, modified cans, asv's, 50th anniversary - Lorenzo paint job
Two Brothers cans and some carbon guards (now gone)
KTM 1190 - All the extras, full bashplate and bars, Akro, and the wife likes it too...
2013 R1 - 14b - Gilles, decat, modified cans, asv's, 50th anniversary - Lorenzo paint job
Two Brothers cans and some carbon guards (now gone)
-
- Been Here a While
- Posts: 30
- Joined: Sun Aug 02, 2015 6:14 pm
- Bike Make & Model: R1
Re: Lurker finally says hi
So I only got a couple of dry sessions on the new bike on Tuesday because of the fine British weather lol, but ...
WOW what a bit of kit, it feels like an absolute weapon. Really looking forward to taking it somewhere I know well so I can really gel with it. Also need some new wets so I don't do what I did with the old bike on the last session ... oops
WOW what a bit of kit, it feels like an absolute weapon. Really looking forward to taking it somewhere I know well so I can really gel with it. Also need some new wets so I don't do what I did with the old bike on the last session ... oops