Coolant quantity

New to the forum? Then say hello here
Post Reply
DamianMG
Newbie
Posts: 1
Joined: Mon Nov 03, 2025 7:48 am
Bike Make & Model: R1 14b 2009

Coolant quantity

Post by DamianMG »

Hi guys, happy to be here. this is my first post on this forum. So I own a R1 14b 2009. Recently I replaced the starter motor and had to empty the cooling system. So today decide to flush and fill it back. At the end looking in the manufacture specifications it says should go in 2.73 l of coolant in the radiator including all routes and 0.25 in the coolant reservoir. In my bike all together went only 2 l. Is this an issue? Have I done something wrong when empty the system and flush it?or maybe when fitted back the thermostat? If anyone knows please share it with me. I used motul motocool factory line organic if relevant. Thanks


User avatar
Moise
Donator
Donator
Posts: 9023
Joined: Wed Jul 09, 2014 8:19 am
Bike Make & Model: Yamaha R1 4xv
Location: Auckland, New Zealand

Re: Coolant quantity

Post by Moise »

I don't know about the 14b specifically but my 4xv is the same. There is usually some coolant left in the engine and radiator after you empty through the drain plug.

When you refill, leave the radiator cap off until the thermostat opens in case any air is trapped in the system.
"You don't get slower with age, you just get more cautious." Michael Rutter

1999 4xv in blue
Post Reply