www.YamahaR.co.uk

Hi Everyone,
I do apologise if this has already been asked. I have an R1 and want to mount a gopro to the pivot mount on the headstock. I would be grateful for any experience of where to buy the fitting or ideas around it.

Cheers H

I know you can buy them but I can't remember where off the top of my head. Search on the TDR forum (you don't have to be a member), there's loads of threads on there about mounting them including the site you need.

I made one for my aim solo out of a bolt through the mounting plate and a bit of rubber hose with a nut and washer on the bottom. Do the nut and bolt up and the hose expands in the headstock hole. Same could easily be done for a GoPro.

I use the spindle part of one of these...
http://www.ebay.co.uk/itm/MOTORCYCLE-FO ... 23124b9fd9" onclick="window.open(this.href);return false;
...but without the plastic ball part and use with an extra mount I made. Problem with the ram mount is too much vibration, so I Had to modify it...

Now this works great...

But Simons suggestion seems like the cheapest and easiest route.

Welcome to the Forum James

Welcome to the forum pal - surely u can do a better intro than that tho


Sent from somewhere in the midlands by Paul

R1Clarky wrote:Welcome to the forum pal - surely u can do a better intro than that tho


Sent from somewhere in the midlands by Paul

+1 on that, tell us a bit about yourself and ya biking history

Other than that, welcome to the forum mate

Hi James


Sent from my iPhone using Tapatalk

Hi James


Sent from my iPhone using Tapatalk

Ha just saw this in the active post section and didn't realise it was in the newbies bit.

In that case, hello mate.