www.YamahaR.co.uk

Hi everyone,
I have just bought a 5pw track bike which I am very pleased with.
It has a bit of a dragging clutch but I will sort that out over the winter.

I plan to take the performance of the bike as far as I can go whilst retaining the stock engine internals.
It seems reading on these forums that you can extract quite a few ponys out the engine with some relatively straightforward mods.

I have also plan to build a datalogging system and eventually have a try to build a traction control system using an arduino processing unit.

Should be fun, I will keep you informed!

Hi Coxy welcome to the forum post some picks up of ur new bike ,we have parkitt racing on as a forum sponsor so it may well be worth talking to them as far as tuning goes


Sent from my iPad using Tapatalk

Welcome in you


Sent from my iPhone using Tapatalk

Welcome in pal


Sent from somewhere in the midlands by Paul

Hi Coxy, welcome to the forum.

Dave.

Welcome in Coxy

Hi Coxy and welcome to the forum pal

Hi sorry for the slow response. I will get some pics up tonight, its mainly going to be of a bike in bits but its still interesting (to me)

I have managed to bag a Maxton GP10 shock which was actually for a 2007 R1, but I have made it fit quite easily.

I am going to bite the bullet and get the forks sent off to Maxton for a full upgrade.

I am not the fastest rider in the world but I have ridden a bike with a full maxton setup before and it was incredibly confidence inspiring.

Should be more than enough bike for my requirements.

Bud if it's in bits you'd best start a thread in the projects section too
We love a good project

Will do.
I will set it up tonight when I get in from work.

I need to relocate my regulator so that will be the first section of the project!