Hi guys need some advice
-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Hi guys need some advice
Hi guys I prob wont be on here too long but here goes, I had a bad bike accident 6 months ago on my Hayabusa and am only just well enough to get about, as well as the busa I have a ZZR1200 a 98 R1 with loads of trick bits and a 98 R1 track bike with only 6,000 miles on it (not been tracked yet) I need some advise as to the best way to go with selling the R1's, my immediate thoughts are to break the track bike, sell the motor and speedo cluster for good money and use the stock parts (forks, brakes, swingarm, wheels etc) to put the road R1 close to stock. I need someone to value the trick bits I will need to sell so i can see if this is viable
Ohlins front forks
Ohlins remote rear shock (brand new)
Ohlins 916 damper and fitting kit
Harris Triple clamps
Marchesini wheels
AP front Brakes
AP rear brake
AP master cylinder
Harris Swingarm
Akrapovic exhaust
Gilles rearsets
ProMach Triple clamps
De Preto Moto billet mirrors
Race style filler cap
I would still be left with some stock parts to sell
98 frame but fitted with CBR600 self supporting seat
wiring loom, clip ons , track fairing etc
Im not going to be well enough to ride for a while so they have to go, can someone value these parts for me. I would sell the bikes complete at the right money as well, pics are no problem.
Sorry to storm in with a post like this but 6 months with not working has hurt the pocket somewhat. the accident was classed as fatal till I came out of the coma.
On a lighter note some R1 wheeliness !!!
http://www.youtube.com/watch?v=Ye_BFUTRYPM" onclick="window.open(this.href);return false;
Ohlins front forks
Ohlins remote rear shock (brand new)
Ohlins 916 damper and fitting kit
Harris Triple clamps
Marchesini wheels
AP front Brakes
AP rear brake
AP master cylinder
Harris Swingarm
Akrapovic exhaust
Gilles rearsets
ProMach Triple clamps
De Preto Moto billet mirrors
Race style filler cap
I would still be left with some stock parts to sell
98 frame but fitted with CBR600 self supporting seat
wiring loom, clip ons , track fairing etc
Im not going to be well enough to ride for a while so they have to go, can someone value these parts for me. I would sell the bikes complete at the right money as well, pics are no problem.
Sorry to storm in with a post like this but 6 months with not working has hurt the pocket somewhat. the accident was classed as fatal till I came out of the coma.
On a lighter note some R1 wheeliness !!!
http://www.youtube.com/watch?v=Ye_BFUTRYPM" onclick="window.open(this.href);return false;
- Luke03R1
- Donator
- Posts: 10679
- Joined: Wed Dec 05, 2012 1:26 am
- Bike Make & Model: 5PW/4C8/SRAD750
- Location: Somerset
Re: Hi guys need some advice
Welcome in Jonny glad to here your on the road to recovery, as for the parts you could search the bay and such like for comparative prices not sure anyone's going to be arsed to do it for ya
I think In general if you can strip off the trick bits and still sell complete bikes that would be the best way. Quite a few 4xv riders on here might snap up at the right money 



- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hi guys need some advice
Welcome I Johnny, glad your on the mend ! As Luke says unless someone wants the track bike as is and is willing pay your price I'd thing putting back to stock is the way to go, best bet is ebay, if I get a chance to sniff around tonight I will fella and add the pricing for you, once pricing added you would be best creating an advert for each item with pictures (read about using photobucket in rules section) and putting full description and new / wanted price.
All the best and hope u make a full recovery soon !
Mike
All the best and hope u make a full recovery soon !
Mike
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Re: Hi guys need some advice
Thanks for the replies guys and Dammo for the PM, I cant reply yet in PM. Heres a couple of pics




-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
- Luke03R1
- Donator
- Posts: 10679
- Joined: Wed Dec 05, 2012 1:26 am
- Bike Make & Model: 5PW/4C8/SRAD750
- Location: Somerset
Re: Hi guys need some advice
Supra drag car, ac cobra ......... where do you work !
i'm thinking a dodgy chop shop 



-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
- 2002r1jon
- Site Admin
- Posts: 12186
- Joined: Tue Nov 27, 2012 9:20 am
- Bike Make & Model: Yam R1 5PW and BMW
- Location: Sunny Belper,Derbyshire
- Contact:
Re: Hi guys need some advice
Welcome in John
glad to hear your on the mend,sounds like you were very lucky mate
I have a 4XV track bike,but as this lot on here will vouch,im very tight,so anything for a 4XV your giving away,send it my way mate

I have a 4XV track bike,but as this lot on here will vouch,im very tight,so anything for a 4XV your giving away,send it my way mate


Never take life seriously. Nobody gets out alive anyway
-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Re: Hi guys need some advice
I may have had a bang on the head but it wasnt that hard !!!!2002r1jon wrote:Welcome in Johnglad to hear your on the mend,sounds like you were very lucky mate
I have a 4XV track bike,but as this lot on here will vouch,im very tight,so anything for a 4XV your giving away,send it my way mate


-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Re: Hi guys need some advice
Its a little loudLuke03R1 wrote:The back end looks nice Johnnynot sure on the zorst though
![]()

- Bub
- Site Admin
- Posts: 12669
- Joined: Tue Nov 27, 2012 12:08 pm
- Bike Make & Model: S1000rr R1 GSX750
- Location: Chelmsford
- Contact:
Re: Hi guys need some advice
As the guys said it's probably best to search ebay's ended listings for prices mate, oh and welcome to the forum

SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP
-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Re: Hi guys need some advice
Gonna try and get the track bike running and sell both complete if possible
Re: Hi guys need some advice
JohnnyDangerous wrote:Gonna try and get the track bike running and sell both complete if possible
Whats required to get the trackbike up and running?
What sort of price are you looking for?
Re: Hi guys need some advice
03R1 wrote:JohnnyDangerous wrote:Gonna try and get the track bike running and sell both complete if possible
Whats required to get the trackbike up and running?
What sort of price are you looking for?
Oh and where abouts are you?...

-
- Lurker
- Posts: 8
- Joined: Sun Mar 03, 2013 10:19 am
- Bike Make & Model: 1998 R1
Re: Hi guys need some advice
I have had it running, it had stale fuel in it from sitting in the guys living room for 2 years, I need to go get the fairings buy a screen and fit them, its got brand new Ohlins remote shock, ProMach triple clamps, New gilles rear sets and brand new chain never been run. Was hoping for 2.5K Its done 6000 miles and can be put back on the road.
Im near Gatwick dude
Im near Gatwick dude