to ride or not to ride

New to the forum? Then say hello here
Post Reply
RATSIL
Newbie
Posts: 4
Joined: Mon Jun 10, 2013 7:37 pm
Bike Make & Model: r1 2007 4c8 white
Location: North East Enland

to ride or not to ride

Post by RATSIL »

hi all after checking my chain today ive found ive got a tight spot. ive adjusted to the tightest point and its got about half inch of play ,problem is im doing about 200 mile trip this weekend , getting new chain and sprockets fitted when i get back . was just wondering whether to chance the trip or not cheers :?


User avatar
Bub
Site Admin
Site Admin
Posts: 12669
Joined: Tue Nov 27, 2012 12:08 pm
Bike Make & Model: S1000rr R1 GSX750
Location: Chelmsford
Contact:

Re: to ride or not to ride

Post by Bub »

Don't think i'd risk it
Image


SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP
User avatar
PJC
Donator
Donator
Posts: 11776
Joined: Thu Nov 29, 2012 8:39 pm
Bike Make & Model: GSXR1000K5 5PW
Location: No Fixed Abode

Re: to ride or not to ride

Post by PJC »

As you are going to be replacing it, I would soak the tight spot in WD if it works Bingo, just remember not to use it on an O ring chain you intend to keep using.
Image


Tuck in behind me, i'll show you the best place to crash

Stopped drinking, smoking, taking drugs and running sex parties, luckily ive still bikes to corrupt me 8-)
User avatar
Bub
Site Admin
Site Admin
Posts: 12669
Joined: Tue Nov 27, 2012 12:08 pm
Bike Make & Model: S1000rr R1 GSX750
Location: Chelmsford
Contact:

Re: to ride or not to ride

Post by Bub »

PJC wrote:As you are going to be replacing it, I would soak the tight spot in WD if it works Bingo, just remember not to use it on an O ring chain you intend to keep using.
Good call Pete
Image


SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP
RATSIL
Newbie
Posts: 4
Joined: Mon Jun 10, 2013 7:37 pm
Bike Make & Model: r1 2007 4c8 white
Location: North East Enland

Re: to ride or not to ride

Post by RATSIL »

Thanks for your help im not gona risk it the way my lucks going . i will just have to wait untill nxt week to sort it thanks again rob :D
RATSIL
Newbie
Posts: 4
Joined: Mon Jun 10, 2013 7:37 pm
Bike Make & Model: r1 2007 4c8 white
Location: North East Enland

Re: to ride or not to ride

Post by RATSIL »

Bub wrote:
PJC wrote:As you are going to be replacing it, I would soak the tight spot in WD if it works Bingo, just remember not to use it on an O ring chain you intend to keep using.
Good call Pete
thanks for that rob
User avatar
stug
Been here too long
Posts: 2634
Joined: Thu Nov 29, 2012 10:05 pm
Bike Make & Model: 2006 R1
Location: SCOTLAND

Re: to ride or not to ride

Post by stug »

When you say tight spot do you just mean a tight spot in the chain or a seized link?
If its a seized link what PJC says might work but if its just a tight spot I would continue using it as long as its not majorly bad.
Post Reply