Page 1 of 1
New member from Bucks
Posted: Fri Aug 09, 2013 7:04 pm
by Mikehargreaves
Hey Fellas
Just a quick intro. I'm a 36 yr old bloke who lives in Wendover Bucks and in the last year or so I rekindled my love of riding bikes. I used to ride a 52 plate R6 but had a bit of a lay off and came back with a 05 R1. Absolutely loving it and as a typical bloke (and engineer) love meddling with the bike and adding bits and bobs.
I'm always up for a quick spin out if anyones nearby and fancies a ride out. I'm also more than happy to help people with mods and general servicy type stuff...
I'm also looking at getting into track days if anyone has a trailer and would be interested in comming (or taking me) along.
Safe one guys
Mike
Signature to follow.....
Re: New member from Bucks
Posted: Fri Aug 09, 2013 7:07 pm
by CBXTrev
Welcome Mike!
Re: New member from Bucks
Posted: Fri Aug 09, 2013 7:11 pm
by Mikehargreaves
Cheers.
Ps if you've got a PC5 or PC3 check out my cheap alternative to a quickshifter Mod in the 'tips and tricks' section.....
Mike
Re: New member from Bucks
Posted: Fri Aug 09, 2013 7:57 pm
by 2002r1jon
Welcome in Mike,hope to see you at a trackday soon
Re: New member from Bucks
Posted: Fri Aug 09, 2013 8:03 pm
by Chinny
Welcome to the forum Mike
Re: New member from Bucks
Posted: Fri Aug 09, 2013 9:04 pm
by Luke03R1
Welcome in Mike ....... good intro
Re: New member from Bucks
Posted: Fri Aug 09, 2013 9:44 pm
by PJC
Nice one Mike, enjoy
Re: New member from Bucks
Posted: Sat Aug 10, 2013 4:20 am
by Scottyadam81
Hi Mike,
Welcome to the site.
Re: New member from Bucks
Posted: Sun Aug 11, 2013 2:09 pm
by Madturk999
Hi mate welcome
Re: New member from Bucks
Posted: Sun Aug 11, 2013 7:28 pm
by Scrapman
Aloha amigo.
Re: New member from Bucks
Posted: Mon Aug 12, 2013 7:45 am
by Crownan
Welcome in, I'm in Bucks too (although my bike is currently dead at the moment).
Re: New member from Bucks
Posted: Tue Aug 13, 2013 11:40 am
by Mikehargreaves
Crownan wrote:Welcome in, I'm in Bucks too (although my bike is currently dead at the moment).
Cheers Fellas.
Crownan, whats up with your bike?
Mike
Re: New member from Bucks
Posted: Tue Aug 13, 2013 2:00 pm
by pod
Got bit by swiss alps so I heard. Welcome in sir, I may well take you up on quickshifter for my 04. Got pc 3
Sent from my GT-I9300 using Tapatalk 4
Re: New member from Bucks
Posted: Tue Aug 13, 2013 4:05 pm
by Mikehargreaves
pod wrote:Got bit by swiss alps so I heard. Welcome in sir, I may well take you up on quickshifter for my 04. Got pc 3
Sent from my GT-I9300 using Tapatalk 4
Cheers and yeh no worries I reckon it'll work OK with the PC3 and it would be good to give it a test. The only issue is the PC3 has a 'plug in' type cable for the quickshifter and I have no idea (as I dont have a PC3) what the plug is or whether (hopefully) its a standard type plug thats readily available. Other than that the concept will work ok (absolute worst case senario you'll have to solder some wires on to the relevant pins of the PC3 (again without seeing the paperwork or a quickshifter made for a PC 3 I wouldnt even know which pins to suggest.....)
ANYONE out there with a PC style dynoject quickshifter willing to post a close up of the plug on the end of the quickshifter cable (PC3 end) ????