hi, new member
Posted: Thu Sep 05, 2013 8:45 pm
hi, just joined so thought id say hi, i currently own a 2003 R1 and will soon be posting in the help section on fitting a power commander 3 lol
www.YamahaR.co.uk
A site for Yamaha YZF R125, R3, R6, R7, R9 and R1 R1M Owners
https://www.yamahar.co.uk/
hi, new member
Page 1 of 1
Re: hi, new member
Posted: Thu Sep 05, 2013 8:48 pm
Welcome Rich
Re: hi, new member
Posted: Thu Sep 05, 2013 8:52 pm
Welcome in Rich,think ive just tried answering your questions over on another forum 
Re: hi, new member
Posted: Thu Sep 05, 2013 9:01 pm
hi you possibly have on rtuna? ill have a look, its really bugging me now lol
Re: hi, new member
Posted: Thu Sep 05, 2013 9:21 pm
Hi welcome mate
Re: hi, new member
Posted: Thu Sep 05, 2013 9:32 pm
Welcome in bud
Re: hi, new member
Posted: Thu Sep 05, 2013 10:32 pm
Welcome in enjoy the best R1 forum
Re: hi, new member
Posted: Fri Sep 06, 2013 12:36 pm
Re: hi, new member
Posted: Fri Sep 06, 2013 2:49 pm
Welcome in 
Re: hi, new member
Posted: Fri Sep 06, 2013 3:33 pm
Hello and welcome to a very helpful forum
Re: hi, new member
Posted: Fri Sep 06, 2013 6:19 pm
^^ very true^^PJC wrote:the best R1 forum
Awesome site owners too,one very good looking,one short and one fat
(im just the right weight and hieght,so i must be the good looking one 
)Re: hi, new member
Posted: Fri Sep 06, 2013 7:16 pm
welcome in , why not get your R1 flash tuned instead !
Re: hi, new member
Posted: Fri Sep 06, 2013 7:33 pm
Thanks. What's the difference? Just about sorted the pc3 now
Re: hi, new member
Posted: Fri Sep 06, 2013 8:52 pm
Think you need to talk to r1Mike but take a look in the velox racing section .
From what i can gather rather than wiring a power commander into your bike you have your Ecu "flashed" , power commander can only alter a few things i believe this is mainly fueling but a "flash tune" can alter most things . On the plus side you can adjust a power commander yourself but would you really mess around with it once it's set ?
From what i've seen/been told you get the best results from both using a dyno/rolling road but r1Mike is getting some great feed back from his postal service
From what i can gather rather than wiring a power commander into your bike you have your Ecu "flashed" , power commander can only alter a few things i believe this is mainly fueling but a "flash tune" can alter most things . On the plus side you can adjust a power commander yourself but would you really mess around with it once it's set ?
From what i've seen/been told you get the best results from both using a dyno/rolling road but r1Mike is getting some great feed back from his postal service
Re: hi, new member
Posted: Fri Sep 06, 2013 9:30 pm
Thanks for that info. Ill look into it. Pc3 is all fitted now so will give that a go now I've finally done it lol
Re: hi, new member
Posted: Sat Sep 07, 2013 6:20 am
What ever you decide to run with i hope it all works out 
Re: hi, new member
Posted: Sat Sep 07, 2013 10:00 am
FlashTune is only available for the later models,4C8 onwards
Re: hi, new member
Posted: Sat Sep 07, 2013 11:59 am
Ahhh so what about blades ?
Cheers jon didn't realise that
Cheers jon didn't realise that
Re: hi, new member
Posted: Sat Sep 07, 2013 12:16 pm
Never mind Jompy, best you go back to destroying perfectly good bikesjompy wrote:Ahhh so what about blades ?
Cheers jon didn't realise that
Re: hi, new member
Posted: Sat Sep 07, 2013 12:48 pm
i really can't imagine what you meanPJC wrote:Never mind Jompy, best you go back to destroying perfectly good bikesjompy wrote:Ahhh so what about blades ?
Cheers jon didn't realise that
