Page 1 of 2
Fault code
Posted: Mon Mar 03, 2014 3:55 pm
by paul brown
Hi.
I am new to this
Can anybody help me. I have got a 1999 R1 which has been stored for a few years got it running ok but the tacho keeps going from 0 to eather 84 or 85 I can't descide which yet, it does this every few secounds I take this to be a fault code, can anybody tell me what it is and how to clear it, its driving me nuts thanks.
Re: Fault code
Posted: Mon Mar 03, 2014 4:40 pm
by PJC
Well if that's an intro then this is a welcome in

enjoy and good luck on your fault code finding

Re: Fault code
Posted: Mon Mar 03, 2014 6:31 pm
by jompy
paul brown wrote:Hi.
I am new to this
Can anybody help me. I have got a 1999 R1 which has been stored for a few years got it running ok but the tacho keeps going from 0 to eather 84 or 85 I can't descide which yet, it does this every few secounds I take this to be a fault code, can anybody tell me what it is and how to clear it, its driving me nuts thanks.
Welcome in paul
Here you go
Fuel level indicator light• Improper connection• The tachometer displays the condition code 8,000 r/min . it will display as follows ; 0 rpm for 3 seconds then fault code for 2.5 seconds then engine speed for 3 seconds
viewtopic.php?f=10&t=15
download this service manual & you need to look in page 403 self diagnosis
Re: Fault code
Posted: Mon Mar 03, 2014 7:13 pm
by hash29
Are you here to take part in the forum or just trawling the net for answers, if its to take part then please introduce yourself with some history and pics, then we can all welcome you to the forum .
If it is just trawling for answers then it would be nice to know so we dont waste our time with all the welcomes..
Sorry but seems to happen lots of late (hello i got an r1 but!!!!!!)
If you are here as you would like to take part in the carlsberg of yamaha forums then welcome in , enjoy the site and the banter

Re: Fault code
Posted: Mon Mar 03, 2014 7:19 pm
by pod
If pablo sees this post then god forbid, hes sees them off faster than I change parts on my bike lol
Sent from my GT-I9300 using Tapatalk
Re: Fault code
Posted: Mon Mar 03, 2014 7:21 pm
by hash29
Re: Fault code
Posted: Mon Mar 03, 2014 7:39 pm
by PJC
You guys need to learn my subtle approach

Re: Fault code
Posted: Mon Mar 03, 2014 7:42 pm
by hash29
PJC wrote:You guys need to learn my subtle approach

lol pete
Re: Fault code
Posted: Mon Mar 03, 2014 8:18 pm
by stug
Some people are not into computers and forums and will only seek help as a final resort.
Should these people be ridiculed or helped in the hope that they stick around and possibly add info in the future?
Theres probably a large percentage of people on forums who originally joined up cause they had a problem.
Re: Fault code
Posted: Mon Mar 03, 2014 9:07 pm
by jompy
stug wrote:Some people are not into computers and forums and will only seek help as a final resort.
Should these people be ridiculed or helped in the hope that they stick around and possibly add info in the future?
Theres probably a large percentage of people on forums who originally joined up cause they had a problem.
i see what your saying stug & i try to help them in the hope they'll stick around but when they don't it piss's me off as i hate ignorance !
or is it true what Cypher said ? "ignorance is bliss"
Re: Fault code
Posted: Mon Mar 03, 2014 9:37 pm
by paul brown
I am sorry i am an old bloke and a bit shy and never done this before, have brought the bike as a bit of fun do have other bikes the r1 is a bit tatty so I don't want to show it as yet so I thought I jump into the deep end with a queston my applogies to every one
Re: Fault code
Posted: Mon Mar 03, 2014 9:38 pm
by Scrapman
stug wrote:Some people are not into computers and forums and will only seek help as a final resort.
Should these people be ridiculed or helped in the hope that they stick around and possibly add info in the future?
Theres probably a large percentage of people on forums who originally joined up cause they had a problem.
I joined at the conception and still have a million problems, most of them from hanging around here
Sent to heaven coz hell was full.
Re: Fault code
Posted: Mon Mar 03, 2014 9:41 pm
by stug
Welcome in, best thing you can do to calm the inmates is tell us about your biking history, however boring it might seem to you it can entertain others.
Pics if you can of anything as well.
Re: Fault code
Posted: Mon Mar 03, 2014 9:45 pm
by jompy
paul brown wrote:I am sorry i am an old bloke and a bit shy and never done this before, have brought the bike as a bit of fun do have other bikes the r1 is a bit tatty so I don't want to show it as yet so I thought I jump into the deep end with a queston my applogies to every one
Paul theres no need to be shy & never take anything on here personally , i'm sure your not the oldest bloke here i think the average age is 40 , as for your R1 not being pristine have you seen mine pmsl . Go have a look at the projects section & Mark YPVS's triggers broom ( R1 on a budget ) .
You found us because you had a problem & needed an answer , you have that answer . . . . . . . don't disappear see what this place can offer , scrapman will tell you it's more of a home than just some where to find an answer

Re: Fault code
Posted: Mon Mar 03, 2014 10:02 pm
by 2002r1jon
paul brown wrote:I am sorry i am an old bloke and a bit shy and never done this before, have brought the bike as a bit of fun do have other bikes the r1 is a bit tatty so I don't want to show it as yet so I thought I jump into the deep end with a queston my applogies to every one
No need for apologies Paul,just prove these fuckers wrong and keep coming on here,join in and become part of the R1 community
Welcome in Paul

Re: Fault code
Posted: Mon Mar 03, 2014 10:06 pm
by pod
Like I said earlier paul , welcome in sir. As a shy retiring type myself I feel your pain
Sent from my GT-I9300 using Tapatalk
Re: Fault code
Posted: Mon Mar 03, 2014 10:12 pm
by hash29
lol paul we are mostly old gits on here but we have a love for yamaha that unites, so get comfy and join in as its fun here ..
Welcome aboard fella.
Lets see the tatty r1 as it will be nice to see it progress into a thing of beauty over the year

Re: Fault code
Posted: Mon Mar 03, 2014 10:13 pm
by 2002r1jon
pod wrote: As a shy retiring type myself I feel your pain
oh well,if we are admitting being shy ill add myself to that,im sure Bub,Luke,PJC,Scrappy etc will be along also to admit the same

Re: Fault code
Posted: Mon Mar 03, 2014 10:15 pm
by pod
Did you jon add them names on the "shy" list or "shyte" list
Sent from my GT-I9300 using Tapatalk
Re: Fault code
Posted: Mon Mar 03, 2014 10:29 pm
by 2002r1jon
pod wrote:Did you jon add them names on the "shy" list or "shyte" list
Sent from my GT-I9300 using Tapatalk

Re: Fault code
Posted: Mon Mar 03, 2014 10:31 pm
by pod

. Just checking
Sent from my GT-I9300 using Tapatalk
Re: Fault code
Posted: Mon Mar 03, 2014 11:31 pm
by LOCKE
Welcome in mate all you need is a R1/6/125 and thick skin!
Colin
Re: Fault code
Posted: Mon Mar 03, 2014 11:58 pm
by Scrapman
Aye hello.
To shy to say much more.
Sent to heaven coz hell was full.
Re: Fault code
Posted: Wed Mar 05, 2014 12:41 am
by PJC
Paul you have passed the first test, you're still here and have given back to us R1 Forum o philes.
We really are a friendly bunch of misfits and most are well over 40

.
Now leave youe sensitive side at the door, get involved enjoy and have fun learning from our feck ups and many

crashes

Re: Fault code
Posted: Wed Mar 05, 2014 7:06 pm
by hash29
PJC wrote:Paul you have passed the first test, you're still here and have given back to us R1 Forum o philes.
We really are a friendly bunch of misfits and most are well over 40

.
Now leave youe sensitive side at the door, get involved enjoy and have fun learning from our feck ups and many

crashes

pete is full of all the above
