Page 1 of 1
2000 Pre load adjuster
Posted: Sun Nov 16, 2014 4:47 pm
by Wanny
I Guys
I need help, just bought a R1 4xv and setting the front suspension up when the rebound screws just spin, no clicking or even seating just spinning.
Any ideas?
Thanks guys.
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 4:51 pm
by jompy
Welcome in Peter
Sorry mate they sound fucked to me but then again I'm on my second set of forks now & never touched them so I guess we'd better wait for someone that knows what the f**k they're on about to turn up . . . . . . . . . . . It maybe a long wait

Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 4:53 pm
by PJC
Yer welcome in
Bit more about yourself, biking history and photos usually work well on here
As for the adjuster, I would suggest its snapped
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 5:27 pm
by Wanny
Sorry guys
I been riding for about 2 years own:
R1 2000
Hayabusa full power
GSXR 1100 slabside all original 6k on clock
Xr650r supermoto
This R1 is new to me, just fitted Ohlins damper and went to set up forks to find the rebound screw spins.
Thanks
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 5:31 pm
by PJC
Now you really need to load some photos of all your bikes.
If you are not sure how to then have a look at the below thread
viewtopic.php?f=4&t=144" onclick="window.open(this.href);return false;
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 6:01 pm
by Wanny
Cheers PJC
Can I not just add the to my reply?
Thanks
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 6:06 pm
by R1Clarky
Welcome peter the carb'd R1's are a lot of fun - looking forward to seeing ur bike pics
Sent from somewhere in the midlands by Paul
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 6:39 pm
by jompy
XR650 ! nice
1100 slabby ! nice
5jj ! nice
come on mate get some pic's up ! but not the Busa as they're just plain butt ugly

Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:01 pm
by R1Clarky
^^ true rocket-ship fast but ugly as fook
Sent from somewhere in the midlands by Paul
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:13 pm
by PJC
Wanny wrote:Cheers PJC
Can I not just add the to my reply?
Thanks
Yes you can add them but you need a hosting site, then copy and paste into your thread , make sure you use the IMG tag otherwise it wont work

Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:20 pm
by Wanny
.
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:28 pm
by jompy
wanny you forgot to highlight your photobucket link so that it's in blue ( the same as highlighting it to copy it to clipboard ) & while it's blue click on the "IMG" tab ^^^
you also have to do it one pic at a time
upload your pic to photobucket , when you click on the pic to the right of the pic it will say "share links"

put your cursor over "direct" where the http web address is & left click this will save the link to your clip board & you will end up with "
http://i185.photobucket.com/albums/x193/jompy15/R1.jpg" when you right click & click on paste , hold your cursor at one end of this address left click & old the button down dragging the mouse over the address turning it blue , take your finger off the mouse button & then click the "IMG" tab just above &and it will put the [ img ] [ /img ] either side of the address for you [ img ]
http://i185.photobucket.com/albums/x193/jompy15/R1.jpg[ /img ]
when you post you will see

Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:35 pm
by Wanny
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:42 pm
by R1Clarky
Wanny just the usual - fork service/rebuild or scour eBay for a replacement - not a lot of help really I know but good luck pal
Sent from somewhere in the midlands by Paul
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 7:48 pm
by Wanny
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 8:46 pm
by PJC
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 9:36 pm
by jompy
Who's was the XR ?
not the GSXR1100 i was thinking of Pete , the one i like is earlier i think , top frame rail under the tank was more horizontal , killer k's about G reg i think !.
f**k knows i'm pissed !
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 11:07 pm
by R1Clarky
Love them old gixxers just a massive lump of grunt

- jompy r u sure ur safe on t'internet whilst under the influence lol
Sent from somewhere in the midlands by Paul
Re: 2000 Pre load adjuster
Posted: Sun Nov 16, 2014 11:15 pm
by Moise
Could be as simple as someone reassembing the forks and not refitting the rebound rods???
Re: 2000 Pre load adjuster
Posted: Mon Nov 17, 2014 9:37 am
by jompy
R1Clarky wrote:Love them old gixxers just a massive lump of grunt

- jompy r u sure ur safe on t'internet whilst under the influence lol
Sent from somewhere in the midlands by Paul
Safe ? Me ? Are you kidding

( ask PJC about that Ha Ha Ha )
Re: 2000 Pre load adjuster
Posted: Mon Nov 17, 2014 9:55 pm
by 2002r1jon
Welcome in Peter

Re: 2000 Pre load adjuster
Posted: Sat Nov 22, 2014 9:57 am
by LOCKE
Hello and welcome. The only thing I know about forks is that they normally come with knives!
Colin
Re: 2000 Pre load adjuster
Posted: Tue Dec 02, 2014 10:17 pm
by Steve R1
Welcome in Peter, your pics seem to have disappeared, but saying that I'm not the most it literate person on this site. I hope you have a good sense of humour as you will need one what with all the banter on here.
LOCKE wrote:Hello and welcome. The only thing I know about forks is that they normally come with knives!
Colin
Colon, you have knives and forks in Glasgow...... Next thing you will be telling me is you have inside loos........
