Just saying Hi

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 4:02 pm

R1 nut from the USA but an Ex Brit so don't hate too much.

Look forward to seeing some bikes from back home and seeing some proper spelling...

Damo666 · Post by **Damo666** » Fri Nov 28, 2014 4:20 pm

Welcome in Ian and get some pics up of the bike if you can and any biking history

Post by **R1Clarky** » Fri Nov 28, 2014 4:35 pm

Welcome in mate - enjoy the banter

Sent from somewhere in the midlands by Paul

Post by **pod** » Fri Nov 28, 2014 4:53 pm

Welcome Ian. Don't expect too much spelling accracies from this lot lol

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 5:01 pm

Damo666 wrote:Welcome in Ian and get some pics up of the bike if you can and any biking history

Pics you say, I may have a couple...

Post by **Moise** » Fri Nov 28, 2014 5:40 pm

One or two mods I see...

Welcome. Not just the spelling mate, punctuation and grammar is a bit lacking sometimes.

Post by **jompy** » Fri Nov 28, 2014 5:48 pm

welcome in Ian
Thats looking a bit errr . . . . trick !
As pod says don't hold your breath for the spelling & moise although he's a kiwi is also correct on the grammar ( mines sh!te ! )
hope you enjoy the site & banter buddy

Post by **petepassion** » Fri Nov 28, 2014 5:52 pm

Hi mate, cracking looking bike you've got there

Post by **jompy** » Fri Nov 28, 2014 5:57 pm

petepassion wrote:Hi mate, cracking looking bike you've got there

i hope it's not cracked

Post by **petepassion** » Fri Nov 28, 2014 5:59 pm

jompy wrote:
petepassion wrote:Hi mate, cracking looking bike you've got there
i hope it's not cracked

Nut job

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 6:04 pm

Well at least I can say aluminium here without getting a spell check...

Post by **PJC** » Fri Nov 28, 2014 6:18 pm

Redgecko wrote:Well at least I can say aluminium here without getting a spell check...

It was 10 years as an adult before I understood what the "planks" were on about

Welcome in mate, your craving for proper humor will be satisfied here,

Oh nice bike, very nice bike, where about's do you ride it, obviously not roundabouts

(Do you remember them

)

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 7:17 pm

PJC wrote:
Redgecko wrote:Well at least I can say aluminium here without getting a spell check...
It was 10 years as an adult before I understood what the "planks" were on about

Welcome in mate, your craving for proper humor will be satisfied here,

Oh nice bike, very nice bike, where about's do you ride it, obviously not roundabouts (Do you remember them )

Actually they are throwing them in round here, except they call them "Traffic Circles" and no one knows how the heck to use them...

Post by **jompy** » Fri Nov 28, 2014 7:48 pm

They had an island in longbeach in 1994

Post by **2002r1jon** » Fri Nov 28, 2014 8:25 pm

Welcome in Redneck.....ooops,sorry,I mean Ian

Real nice bike there fella,looks like youve nicked Damo`s swing arm

Shiny-ShoesYZF · Post by **Shiny-ShoesYZF** » Fri Nov 28, 2014 8:31 pm

2002r1jon wrote:Welcome in Redneck.....ooops,sorry,I mean Ian

Real nice bike there fella,looks like youve nicked Damo`s swing arm

At least it's not 8feet long (the swingarm)

Post by **2002r1jon** » Fri Nov 28, 2014 8:36 pm

Shiny-ShoesYZF wrote:
2002r1jon wrote:Welcome in Redneck.....ooops,sorry,I mean Ian

Real nice bike there fella,looks like youve nicked Damo`s swing arm
At least it's not 8feet long (the swingarm)

Shiny-ShoesYZF · Post by **Shiny-ShoesYZF** » Fri Nov 28, 2014 8:47 pm

Sorry gecko - bit of a post hijacking going on here. Welcome though!!

Post by **Bub** » Fri Nov 28, 2014 8:52 pm

Stop posting sh!t on the forum you nobbers [emoji4]

Welcome to the forum mate, nice looking bike

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 8:53 pm

2002r1jon wrote:Welcome in Redneck.....ooops,sorry,I mean Ian

Real nice bike there fella,looks like youve nicked Damo`s swing arm

Just checked his swinger, really nice work. I had a modded stock arm before this one.

Post by **PJC** » Fri Nov 28, 2014 8:54 pm

Redgecko wrote:
PJC wrote:
Redgecko wrote:Well at least I can say aluminium here without getting a spell check...
It was 10 years as an adult before I understood what the "planks" were on about

Welcome in mate, your craving for proper humor will be satisfied here,

Oh nice bike, very nice bike, where about's do you ride it, obviously not roundabouts (Do you remember them )

Actually they are throwing them in round here, except they call them "Traffic Circles" and no one knows how the heck to use them...

Ive seen you and your bike on the Yank forum, BOTM was the thread I think. To be fair you are on a few. Who is the englisg Guy with the Martini liveried R1, thats some piece of kit as well

Here is mine little offering

Man get some footage of the Traffic circles, you will make a mint is the fails section on You tube

Shiny-ShoesYZF · Post by **Shiny-ShoesYZF** » Fri Nov 28, 2014 8:59 pm

Bub wrote:Stop posting sh!t on the forum you nobbers [emoji4]

Welcome to the forum mate, nice looking bike

I think he's talking to you Jon.

Redgecko · Post by **Redgecko** » Fri Nov 28, 2014 9:00 pm

PJC wrote:
Redgecko wrote:
PJC wrote:
Redgecko wrote:Well at least I can say aluminium here without getting a spell check...
It was 10 years as an adult before I understood what the "planks" were on about

Welcome in mate, your craving for proper humor will be satisfied here,

Oh nice bike, very nice bike, where about's do you ride it, obviously not roundabouts (Do you remember them )

Actually they are throwing them in round here, except they call them "Traffic Circles" and no one knows how the heck to use them...
Ive seen you and your bike on the Yank forum, BOTM was the thread I think. To be fair you are on a few. Who is the englisg Guy with the Martini liveried R1, thats some piece of kit as well

Here is mine little offering

Man get some footage of the Traffic circles, you will make a mint is the fails section on You tube

Nice ride

The Martini was an 5VY with 4C8 bodywork and a ton of trick parts. He's from over there in the Brighton area.
Bike has been parted out now though

Post by **PJC** » Fri Nov 28, 2014 9:20 pm

Redgecko wrote:
PJC wrote:
Redgecko wrote:
PJC wrote:
Redgecko wrote:Well at least I can say aluminium here without getting a spell check...
It was 10 years as an adult before I understood what the "planks" were on about

Welcome in mate, your craving for proper humor will be satisfied here,

Oh nice bike, very nice bike, where about's do you ride it, obviously not roundabouts (Do you remember them )

Actually they are throwing them in round here, except they call them "Traffic Circles" and no one knows how the heck to use them...
Ive seen you and your bike on the Yank forum, BOTM was the thread I think. To be fair you are on a few. Who is the englisg Guy with the Martini liveried R1, thats some piece of kit as well

Here is mine little offering

Man get some footage of the Traffic circles, you will make a mint is the fails section on You tube
Nice ride
The Martini was an 5VY with 4C8 bodywork and a ton of trick parts. He's from over there in the Brighton area.
Bike has been parted out now though

Parted out, shame twas a nice ride.

I have rearranged mine somewhat, saved the Ohlins cartridges and WP shock, have a look in crash teat dummies, not pretty

Post by **2002r1jon** » Fri Nov 28, 2014 10:03 pm

Shiny-ShoesYZF wrote:
Bub wrote:Stop posting sh!t on the forum you nobbers [emoji4]

Welcome to the forum mate, nice looking bike
I think he's talking to you Jon.

He would have been way more abusive if he was talking to me

www.YamahaR.co.uk

Just saying Hi

Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi

Re: Just saying Hi