new kid to the block
-
- Lurker
- Posts: 17
- Joined: Tue May 05, 2015 5:30 am
- Bike Make & Model: r6
new kid to the block
Hi all,
Thought I would say a quick hi to introduce myself.
Never had an r6 before but am covering a 2co into a track bike at the moment. So far so good with her apart from snapping 5 of the 8 header bolts when removing the exhaust. Having a full mhp system instead. Ended up having to drill, tap and helicoil all of them in the end! Did a proper job at least! So currently waiting to get my exhaust back. Hopefully it turns up in time as I need it next Thurs for Silverstone!
Currently I have done the following:
Silkolene oil change
Coolant change
K&N oil filter
K&N air filter
Full superbike bodywork race fairing
R&G crash bungs
Double bubble screen
MHP full system w/ clubman can
Rental 520 chain and sprocket conversion
PC3
All bolts swapped for stainless
HRC rear reservoir
HEL front and rear braided lines w/ brembo fluid change
Hoping to get a custom map for my mhp system on wed too.
Thought I would say a quick hi to introduce myself.
Never had an r6 before but am covering a 2co into a track bike at the moment. So far so good with her apart from snapping 5 of the 8 header bolts when removing the exhaust. Having a full mhp system instead. Ended up having to drill, tap and helicoil all of them in the end! Did a proper job at least! So currently waiting to get my exhaust back. Hopefully it turns up in time as I need it next Thurs for Silverstone!
Currently I have done the following:
Silkolene oil change
Coolant change
K&N oil filter
K&N air filter
Full superbike bodywork race fairing
R&G crash bungs
Double bubble screen
MHP full system w/ clubman can
Rental 520 chain and sprocket conversion
PC3
All bolts swapped for stainless
HRC rear reservoir
HEL front and rear braided lines w/ brembo fluid change
Hoping to get a custom map for my mhp system on wed too.
- petepassion
- Donator
- Posts: 4437
- Joined: Sun Mar 09, 2014 8:09 pm
- Bike Make & Model: YamaharZX6R
- Location: Portsmouth
- R1Clarky
- Donator
- Posts: 6445
- Joined: Mon Sep 08, 2014 11:42 am
- Bike Make & Model: Yamaha R1 5JJ
- Location: Leicestershire
Re: new kid to the block






Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy 

Re: new kid to the block
Hi m8 welcome just a word of warning heard a few horror stories about those k&n oil filters shitting themselves don't think I'd trust one ! Enjoy the forum
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Bub
- Site Admin
- Posts: 12669
- Joined: Tue Nov 27, 2012 12:08 pm
- Bike Make & Model: S1000rr R1 GSX750
- Location: Chelmsford
- Contact:
Re: new kid to the block
Never had an issue with the K&N myselfsamr1 wrote:Hi m8 welcome just a word of warning heard a few horror stories about those k&n oil filters shitting themselves don't think I'd trust one ! Enjoy the forum
Sent from my iPad using Tapatalk
Welcome to the forum pal

SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP
- Moise
- Donator
- Posts: 8987
- Joined: Wed Jul 09, 2014 8:19 am
- Bike Make & Model: Yamaha R1 4xv
- Location: Auckland, New Zealand
Re: new kid to the block
K&N are made by Hiflofiltro.
Welcome in.
Welcome in.
"You don't get slower with age, you just get more cautious." Michael Rutter
1999 4xv in blue
1999 4xv in blue
-
- Lurker
- Posts: 17
- Joined: Tue May 05, 2015 5:30 am
- Bike Make & Model: r6
Re: new kid to the block
Never had issues with k&n myself in the past, perhaps you had a Friday afternoon one!! Deffo not my first bike. Been riding since I was 6 yrs old. My bikes get treated better than my mrs. I even have a Ducati 749 coffee table in my front room (I make things like this for Ducati UK).
Bikes I've had then.......sigh
Yz125
Xl600r
Drz400e
Kawasaki z750
Cbr600rr
Cbr600f4i
Ducati 848 evo
Varadero
Currently got 3 in my garage so tis a bit cramped! Will post some pics of the r6 up once I get her outside. All on stands in the garage at the mo whilst I fit the fairings and do the decals.
Bikes I've had then.......sigh
Yz125
Xl600r
Drz400e
Kawasaki z750
Cbr600rr
Cbr600f4i
Ducati 848 evo
Varadero
Currently got 3 in my garage so tis a bit cramped! Will post some pics of the r6 up once I get her outside. All on stands in the garage at the mo whilst I fit the fairings and do the decals.
- R1Clarky
- Donator
- Posts: 6445
- Joined: Mon Sep 08, 2014 11:42 am
- Bike Make & Model: Yamaha R1 5JJ
- Location: Leicestershire
Re: new kid to the block
Loving the idea of a motorbike coffee table 
Sent from somewhere in the midlands by Paul

Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy 

- YZFR1Deano
- Donator
- Posts: 650
- Joined: Mon Apr 01, 2013 2:03 pm
- Bike Make & Model: yamaha R1 2004
- Location: scarborough
- LOCKE
- Donator
- Posts: 5064
- Joined: Sun Jan 13, 2013 5:43 pm
- Bike Make & Model: 2009 YZF R1 14B
- Location: Glasgow
Re: new kid to the block
Welcome in mate. What bid do you own just now?
Colin
Colin

14B. Enough Said.
HEL Pirelli Akrapovic Brembo Gilles Tooling Pro-Bolt GBRacing PCV Renthal K&N
-
- Lurker
- Posts: 17
- Joined: Tue May 05, 2015 5:30 am
- Bike Make & Model: r6
- PJC
- Donator
- Posts: 11776
- Joined: Thu Nov 29, 2012 8:39 pm
- Bike Make & Model: GSXR1000K5 5PW
- Location: No Fixed Abode
Re: new kid to the block
Welcome in mate, nice little collection you have there 


Tuck in behind me, i'll show you the best place to crash
Stopped drinking, smoking, taking drugs and running sex parties, luckily ive still bikes to corrupt me
