First Yamaha Virgin r1

New to the forum? Then say hello here
Post Reply
User avatar
webby
Donator
Donator
Posts: 206
Joined: Fri Sep 25, 2015 8:51 pm
Bike Make & Model: 4xv r1

First Yamaha Virgin r1

Post by webby »

Hi all,
After a recent trip to the Nurburgring (4th trip) which a friend brought along his rsv4 factory.
It promted me to get a bike again. I passed my test a number of years ago and always wanted an r1.
Now at 26 i have one.
Now my main hobby is cars and having my own workshop and a newly acquired house meant although I could buy an expensive new bike, I didnt want to.
So I set about looking for a project and one came about around 8 miles away.

Bought as an unknown I'm sure some of you may have seen it on trader and eBay.

The bike was described as having carb issues and it does indeed. They leak fuel like mad.
That didn't stop me trying to get a quick listen. So after a few cranks it caught ran for 10 seconds and flooded stinking the place out with fumes. Well it ran that's all that mattered

Any way this is getting a bit long winded I'll probably use it to start my progress thread off

Here are a couple of pics.

Plans are strip and rebuild carb,s general tidy, steering damper, that will probably be it for the 2015/2016 until I'm used to riding again.

Enjoy

Image
Image
Last edited by webby on Wed Sep 30, 2015 4:13 pm, edited 2 times in total.


samr1

Re: First Yamaha Virgin r1

Post by samr1 »

Hi welcome in ,nice looking bike


Sent from my iPad using Tapatalk
User avatar
R1Clarky
Donator
Donator
Posts: 6445
Joined: Mon Sep 08, 2014 11:42 am
Bike Make & Model: Yamaha R1 5JJ
Location: Leicestershire

Re: First Yamaha Virgin r1

Post by R1Clarky »

Welcome in pal - we do like a 'projects-thread' remember to take plenty of progress pics - enjoy the forum & join in the banter mate :)


Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy :-)
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: First Yamaha Virgin r1

Post by jompy »

Welcome in Andrew
As Einstein says "we do we do like a 'projects-thread' remember to take plenty of progress pics"
That 4xv looks very clean , seeing as your new to the 4xv i'll paste up the 4xv/5jj newbies post for you
" Those 4xv's are a lovely bike , they share a lot of parts with the 5jj like frame, wheels & engines are similar , things that are different are ECU , bodywork i.e. tank , fairing , seat unit & headlight also the radiator & wiring looms are different .
Make sure you look in the 4xv & 5jj sections .
Check the main 20pin white plug on the wiring loom that sits behind the left hand fairing to make sure its in good order & been greased as these can cause problems , the HT leads can break up when old where the plug cap screws on & cause misfire all you need to do is cut 5-10 mm off the end & screw the cap back on , also DON'T tighten the sump bolt up to 42nm its a lot less more like 15-20nm .
get the service manuals and parts micro fiches for both the 4xv & 5jj downloaded , use the online PDF link & down load the parts manuals from there .
http://www.partzilla.com can be helpful for online parts micro fiches for getting part numbers & checking prices in the states as theyre prices are cheaper or you could try https://www.fowlersparts.co.uk/browser/ ... bike/yzfr1
enjoy :)"
User avatar
webby
Donator
Donator
Posts: 206
Joined: Fri Sep 25, 2015 8:51 pm
Bike Make & Model: 4xv r1

Re: First Yamaha Virgin r1

Post by webby »

Thank you so much for the welcome chaps. i did a little bit on the bike this eveing and took a few pictures so i will start up on my progress thread. i'll be sure to do lots of reading. i have the service manual which i got from a website i cant rember and the parts one i will have to scout out. Thanks you!
Does this mean a 5jj steering damper would fit or not becasue if it mounts infront of the tank ala "916" style could there be a possibility of it fouling the tank?
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: First Yamaha Virgin r1

Post by jompy »

webby wrote:Thank you so much for the welcome chaps. i did a little bit on the bike this eveing and took a few pictures so i will start up on my progress thread. i'll be sure to do lots of reading. i have the service manual which i got from a website i cant rember and the parts one i will have to scout out. Thanks you!
Does this mean a 5jj steering damper would fit or not becasue if it mounts infront of the tank ala "916" style could there be a possibility of it fouling the tank?
i think the main change between the tanks is where the seat meets the tank & the 4xv has bigger side covers , calsport list from 98-00
good price too ;)
https://calsport.co.uk/yamaha-yzf-r1-98 ... ers/SXY10/
User avatar
petepassion
Donator
Donator
Posts: 4437
Joined: Sun Mar 09, 2014 8:09 pm
Bike Make & Model: YamaharZX6R
Location: Portsmouth

Re: First Yamaha Virgin r1

Post by petepassion »

Hi and welcome to the forum.
Plenty of folks here to help with the rebuild
Image
...I'm Just a passenger
User avatar
LOCKE
Donator
Donator
Posts: 5064
Joined: Sun Jan 13, 2013 5:43 pm
Bike Make & Model: 2009 YZF R1 14B
Location: Glasgow

Re: First Yamaha Virgin r1

Post by LOCKE »

Welcome in mate. Good luck with the bike.

Colin
Image
14B. Enough Said.

HEL Pirelli Akrapovic Brembo Gilles Tooling Pro-Bolt GBRacing PCV Renthal K&N
User avatar
Steve R1
Donator
Donator
Posts: 13589
Joined: Fri Dec 06, 2013 9:28 pm
Bike Make & Model: R1M
Location: Warrington Cheshire

Re: First Yamaha Virgin r1

Post by Steve R1 »

Welcome to the forum mate, good luck with the bikes and the pics have gone :? ... Have you deleted them?

Look forward to the project thread
Dogs leave paw prints in our hearts
User avatar
webby
Donator
Donator
Posts: 206
Joined: Fri Sep 25, 2015 8:51 pm
Bike Make & Model: 4xv r1

Re: First Yamaha Virgin r1

Post by webby »

Ahh I moved them to a new folder on my account refreshed the links.
Progress thread is up and as soon as I'll be ordering a steering damper
Post Reply