newbie with a dead 5eb
-
Steve R1
- Donator
- Posts: 13592
- Joined: Fri Dec 06, 2013 9:28 pm
- Bike Make & Model: R1M
- Location: Warrington Cheshire
Re: newbie with a dead 5eb
Welcome to the forum Darryl , generally before new members ask questions, which we are more than happy to answer, they use the newbie section to introduce themselves, tell us about their biking history and post up pics of their bike, that way we get to know them and you get to know us.
You may find it helpful if you post your question in the relative bike related section, that way members with the same bike as yiurs are more likely to see your question.
Unfortunately for you, I'm the least mechanically minded person on the forum so there is no way I can help you, but the other members who know all about this stuff will be along later, more likely this evening, so hopefully they should be able to help.
I will keep on replying to this post so it remains near the top of active posts, they are more likely to see it then.
Good luck and welcome to the forum
Stephen
You may find it helpful if you post your question in the relative bike related section, that way members with the same bike as yiurs are more likely to see your question.
Unfortunately for you, I'm the least mechanically minded person on the forum so there is no way I can help you, but the other members who know all about this stuff will be along later, more likely this evening, so hopefully they should be able to help.
I will keep on replying to this post so it remains near the top of active posts, they are more likely to see it then.
Good luck and welcome to the forum
Stephen
Dogs leave paw prints in our hearts
-
R1Clarky
- Donator
- Posts: 6445
- Joined: Mon Sep 08, 2014 11:42 am
- Bike Make & Model: Yamaha R1 5JJ
- Location: Leicestershire
Re: newbie with a dead 5eb
+1jompy wrote:0/10 must try harder !
dont be shy mate tell us a bit about ur biking history etc & get some pics up ride as much & often as ya can
Treat everyone with respect unless they prove themselves to be Unworthy
-
Steve R1
- Donator
- Posts: 13592
- Joined: Fri Dec 06, 2013 9:28 pm
- Bike Make & Model: R1M
- Location: Warrington Cheshire
Re: newbie with a dead 5eb
R1Clarky wrote:+1jompy wrote:0/10 must try harder !
ride as much & often as ya can
Come on guys, don't put new members off FFSjompy wrote:0/10 must try harder !
Dogs leave paw prints in our hearts
Re: newbie with a dead 5eb
I am doing the same so any help or tips would be great about 3 months ago brought my first big bike 2000 r6 5eb for cheapish about 2 weeks ago heard a funny ping noise from engine the rattle of little bits of metal in the engine started running sh*t so had compression test done was down on 1 and 2 so I stripped engine out and down big chuck off number 1 cylinder and crack in number 2 so been reading a few forums think I'm guna do 5sl bottom end swap found a 5sl engine guna pick up saterday any advice lads ?