Recently bought an old ex race 4xv from Northern Ireland - popped a daytime on it and rode it back to Scotland. I plan to do some exciting/radical things to it over the winter incl: new subframe/seat unit - alloy endurance tank - engine blueprint/flowed... I want it to still look like an R1..but like it's on steroids - fat/minimal..
Hi from Scotland
-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Hi from Scotland
Hey from Glasgow!
Recently bought an old ex race 4xv from Northern Ireland - popped a daytime on it and rode it back to Scotland. I plan to do some exciting/radical things to it over the winter incl: new subframe/seat unit - alloy endurance tank - engine blueprint/flowed... I want it to still look like an R1..but like it's on steroids - fat/minimal..
Recently bought an old ex race 4xv from Northern Ireland - popped a daytime on it and rode it back to Scotland. I plan to do some exciting/radical things to it over the winter incl: new subframe/seat unit - alloy endurance tank - engine blueprint/flowed... I want it to still look like an R1..but like it's on steroids - fat/minimal..
-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
First image was taken at Larne waiting for the ferry. Once I got back the lower fairing was removed to see what was left of the pipe.. turns out that there was not a bad looking full system living under all of that ghastly looking exhaust wrap - result!
- all I need to do now is chop the bad bit off the silencer and it'll be good to blow..






Re: Hi from Scotland
Hi Doug and welcome to the forum, good bunch of guys and girls on this forum.
Looking at your back catalog you should fit right in
Looking at your back catalog you should fit right in
- Steve R1
- Donator

- Posts: 13596
- Joined: Fri Dec 06, 2013 9:28 pm
- Bike Make & Model: R1M
- Location: Warrington Cheshire
Re: Hi from Scotland
Welcome to the forum Doug, as Mark says, this is a great forum and actually more like a community of knowledgeable (except me) helpful and supportive guys n gals.
Looking forward to see what you do to your new pride and joy.
Welcome
Stephen [emoji3]
Sent from my iPhone using Tapatalk
Looking forward to see what you do to your new pride and joy.
Welcome
Stephen [emoji3]
Sent from my iPhone using Tapatalk
Dogs leave paw prints in our hearts
- Horus-222_R1
- Donator

- Posts: 2771
- Joined: Mon Aug 22, 2016 2:59 pm
- Bike Make & Model: R1 - 14B/E
- Location: Winchester
Re: Hi from Scotland
Welcome in Bud.
Just seen your previous collection too so can imagine where this one’s going!! Enjoy the project and keep us in the loop.
Just seen your previous collection too so can imagine where this one’s going!! Enjoy the project and keep us in the loop.
2012 & yellow - must be one of those anni's.
- Moise
- Donator

- Posts: 9021
- Joined: Wed Jul 09, 2014 8:19 am
- Bike Make & Model: Yamaha R1 4xv
- Location: Auckland, New Zealand
Re: Hi from Scotland
Welcome, looks like a fun project.
"You don't get slower with age, you just get more cautious." Michael Rutter
1999 4xv in blue
1999 4xv in blue
-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
Thanks for the hospitality - appreciated, guys!
)
I'm hoping to inspire and also develop some interesting accessories for the original R1 along the way! Watch this space..
All the best from Glasgow!
I'm hoping to inspire and also develop some interesting accessories for the original R1 along the way! Watch this space..
All the best from Glasgow!
- R1Clarky
- Donator

- Posts: 6445
- Joined: Mon Sep 08, 2014 11:42 am
- Bike Make & Model: Yamaha R1 5JJ
- Location: Leicestershire
Re: Hi from Scotland
welcome in pal [emoji846]
Sent from my SM-N960F using Tapatalk
Sent from my SM-N960F using Tapatalk
Treat everyone with respect unless they prove themselves to be Unworthy 
- jompy
- Moderator

- Posts: 19692
- Joined: Wed Jul 03, 2013 8:24 pm
- Bike Make & Model: 98 4xv Half-One
- Location: Derby
Re: Hi from Scotland
Welcome in doug
Enjoy playing with the 4xv
i love those old Gixxers , its thar frame and tank , i've had a few mates with them and they pull like a train
Enjoy playing with the 4xv
i love those old Gixxers , its thar frame and tank , i've had a few mates with them and they pull like a train
- r1Mike
- Site Admin

- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hi from Scotland
Welcome in to the forum mate, be interested to know what mods you plan.
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
Uh huh the GSXR11'S are proper addictive, owned four of them - two were 1216's, one a Bob Farnham motor and the other a Mistral Performance motor ...crank connected to the back wheel material! Love the torque they produce..jompy wrote: Fri Sep 13, 2019 3:18 pm Welcome in doug
Enjoy playing with the 4xv
i love those old Gixxers , its thar frame and tank , i've had a few mates with them and they pull like a train![]()
-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
Loving the Crazy Garage (Korean mob) S1000RR at the moment..the Yam might be heading in a similar directionr1Mike wrote: Sun Sep 15, 2019 4:29 pm Welcome in to the forum mate, be interested to know what mods you plan.
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]


-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
..Here they are! - Black one was the Mistral engined beastie (my favourite)..the hippie on the left is meboardsofcanada wrote: Mon Sep 16, 2019 12:12 amUh huh the GSXR11'S are proper addictive, owned four of them - two were 1216's, one a Bob Farnham motor and the other a Mistral Performance motor ...crank connected to the back wheel material! Love the torque they produce..jompy wrote: Fri Sep 13, 2019 3:18 pm Welcome in doug
Enjoy playing with the 4xv
i love those old Gixxers , its thar frame and tank , i've had a few mates with them and they pull like a train![]()
![]()




-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
- r1Mike
- Site Admin

- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hi from Scotland
Looking good !
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
pkallesoe
- Been Here a While
- Posts: 41
- Joined: Mon Aug 26, 2019 12:23 pm
- Bike Make & Model: Yamaha r1 4XV
Re: Hi from Scotland
That is somehow quite appealing to me. And welcome btw - Awesome forum!boardsofcanada wrote: Mon Sep 16, 2019 12:18 amLoving the Crazy Garage (Korean mob) S1000RR at the moment..the Yam might be heading in a similar directionr1Mike wrote: Sun Sep 15, 2019 4:29 pm Welcome in to the forum mate, be interested to know what mods you plan.
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]
![]()
Re: Hi from Scotland
boardsofcanada wrote: Mon Sep 16, 2019 12:58 amboardsofcanada wrote: Mon Sep 16, 2019 12:12 am
Wasnt that reg in the background mentioned in another thread recently?
- jompy
- Moderator

- Posts: 19692
- Joined: Wed Jul 03, 2013 8:24 pm
- Bike Make & Model: 98 4xv Half-One
- Location: Derby
Re: Hi from Scotland
Paulos wrote: Fri Apr 24, 2020 5:24 pmWell spotted that manboardsofcanada wrote: Mon Sep 16, 2019 12:58 amWasnt that reg in the background mentioned in another thread recently?
- R15UTT
- Donator

- Posts: 939
- Joined: Wed May 07, 2014 12:27 am
- Bike Make & Model: yamaha R1.98 +09
- Location: South Glamorgan
- Contact:
Re: Hi from Scotland
Paulos wrote: Fri Apr 24, 2020 5:24 pmboardsofcanada wrote: Mon Sep 16, 2019 12:58 amYes . I spotted it in Cardiff area a couple of days ago. Good wheelie from it .boardsofcanada wrote: Mon Sep 16, 2019 12:12 am
Wasnt that reg in the background mentioned in another thread recently?
- Steve R1
- Donator

- Posts: 13596
- Joined: Fri Dec 06, 2013 9:28 pm
- Bike Make & Model: R1M
- Location: Warrington Cheshire
Re: Hi from Scotland
Looking good Doug [emoji1303][emoji4]
Paul.... well spotted [emoji1303][emoji4]
Sent from my iPhone using Tapatalk Pro
Paul.... well spotted [emoji1303][emoji4]
Sent from my iPhone using Tapatalk Pro
Dogs leave paw prints in our hearts
Re: Hi from Scotland
Now that I could live withboardsofcanada wrote: Mon Sep 16, 2019 12:18 amLoving the Crazy Garage (Korean mob) S1000RR at the moment..the Yam might be heading in a similar directionr1Mike wrote: Sun Sep 15, 2019 4:29 pm Welcome in to the forum mate, be interested to know what mods you plan.
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]
![]()
-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
Thanks guys
)
I'm designing a GP-style minimal subframe cage for the R1 - it'll be a bolt together and bolt on job ..obviously the existing sub will be removed and fixing points set in place to take the new unit. It's a very simple DIY job..if you can get past the initial freaky moment of chopping your bike to bits with a grinder
This is my current mockup of the bike - I'm getting an R1M race seat unit delivered tomorrow and I'll be setting it in place to see how it looks...the wavy side flashes of the M unit will be getting removed and I'll be going with the minimal dart look..which looks a lot like a cross between a 2006 R6 and an RC8 seat unit. Interesting stuff, so I'll pop up an image tomorrow


Subframe will look a lot like this un:

I'm designing a GP-style minimal subframe cage for the R1 - it'll be a bolt together and bolt on job ..obviously the existing sub will be removed and fixing points set in place to take the new unit. It's a very simple DIY job..if you can get past the initial freaky moment of chopping your bike to bits with a grinder
This is my current mockup of the bike - I'm getting an R1M race seat unit delivered tomorrow and I'll be setting it in place to see how it looks...the wavy side flashes of the M unit will be getting removed and I'll be going with the minimal dart look..which looks a lot like a cross between a 2006 R6 and an RC8 seat unit. Interesting stuff, so I'll pop up an image tomorrow


Subframe will look a lot like this un:

-
boardsofcanada
- Been Here a While
- Posts: 29
- Joined: Wed Jul 24, 2019 11:54 am
- Bike Make & Model: Yamaha R1
Re: Hi from Scotland
The Korean BMW is an absolute peach of a build! M1 replica sounds interesting..although I do find the overall appearance of them a bit boxy.Danf1 wrote: Sun Apr 26, 2020 7:57 amNow that I could live withboardsofcanada wrote: Mon Sep 16, 2019 12:18 amLoving the Crazy Garage (Korean mob) S1000RR at the moment..the Yam might be heading in a similar directionr1Mike wrote: Sun Sep 15, 2019 4:29 pm Welcome in to the forum mate, be interested to know what mods you plan.
I have a Lacomoto M1 seatunit and tempted to build an M1 replica so interested what your plans are [emoji6]
![]()
![]()
Last edited by boardsofcanada on Sun May 17, 2020 9:20 am, edited 1 time in total.


