Hello!!!!
-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Hello!!!!
Hi to all the members ! ive Just joined site as I've just bought me first r1!!! Ive had bikes for about 10 yrs and raced last season on a cbr600 but I'm better suited to big bike cos I'm not the lightest ha. Seen peter hickmans old 09/10 bsb bike and new it was for me straight away. Anyway thought his place would be good for advise about the bike etc and picking up spares and what ever else I can get me hands on.
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
Welcome in Keith
Glad to see you have a fast one, and not a slower 4C8
Have you got any pictures of your bike then ?

Glad to see you have a fast one, and not a slower 4C8

Have you got any pictures of your bike then ?
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Re: Hello!!!!
I've only got one but still trying to work out how to attach it. Wouldn't let me copy and paste
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
Hi Keith, you need to use something like photobucket.com, upload it there and then get the IMG URL and paste it into here it should have [IMG} in front of it and [ / IMG} at the end of it.
I think there is a post on how to do it in the forum rules, announcements section. If not I will do it later.
I think there is a post on how to do it in the forum rules, announcements section. If not I will do it later.
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Re: Hello!!!!
Cheers bud ill get on it and get uploaded. I seen the URL but never used photo bucket so I think I'll have to do me home work and read that link first.
Thanks for the welcome in gents are most lads/girls in here racers or is there a bit of everything? I came from a Honda cbr racers forum and have been looking to jump into the a Yamaha because the amount of hours I save just buy posting a problem on the other site was amazing. Two minutes you would have a fix or spare part it was invaluable and a good laugh.
I've been told this was a good site to join
Thanks for the welcome in gents are most lads/girls in here racers or is there a bit of everything? I came from a Honda cbr racers forum and have been looking to jump into the a Yamaha because the amount of hours I save just buy posting a problem on the other site was amazing. Two minutes you would have a fix or spare part it was invaluable and a good laugh.
I've been told this was a good site to join
- 2002r1jon
- Site Admin
- Posts: 12186
- Joined: Tue Nov 27, 2012 9:20 am
- Bike Make & Model: Yam R1 5PW and BMW
- Location: Sunny Belper,Derbyshire
- Contact:
Re: Hello!!!!
Who was that then?Butchos wrote: I've been told this was a good site to join

Never take life seriously. Nobody gets out alive anyway
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
There is a good mix of road/trackday plus a couple of racers.
The old forum dissapeared about 6 weeks ago and the owner doesn't seem to want to fix it, so we started this one about 3 weeks ago, most of the regular posters from the now defunct forum are here, they are mostly nice chaps, just look out for Bub..... he has a wee man complex
The old forum dissapeared about 6 weeks ago and the owner doesn't seem to want to fix it, so we started this one about 3 weeks ago, most of the regular posters from the now defunct forum are here, they are mostly nice chaps, just look out for Bub..... he has a wee man complex

-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

- 2002r1jon
- Site Admin
- Posts: 12186
- Joined: Tue Nov 27, 2012 9:20 am
- Bike Make & Model: Yam R1 5PW and BMW
- Location: Sunny Belper,Derbyshire
- Contact:
Re: Hello!!!!
not very tall are you
Nice bike though

Nice bike though

Never take life seriously. Nobody gets out alive anyway
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
Bike looks sweet mate !
So what you had done to it so far ?
So what you had done to it so far ?
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Re: Hello!!!!
This was the email I got before I bought it. I've not been out on it yet only had it a month or two
Peter Hickmans 2010 bsb bike
Factory bitubo superbike forks (not just internals..these retail at 9k!)
Factory bitubo shock
Spondon swing arm
Quick release rear wheel
Factory shock / swingarm linkage
Yamaha italia ram air tubes
6 pit pretec calipers
Brembo sbk rear caliper
Brembo master cylinder
Pyramid Rear sets
Harris Clipons
Yec ecu and loom
Quickshifter
QAT
Race Subframe
Pit lane limiter
Hard and soft maps
Kit bell mouths and air filter
Superstock Motor fitted for reliability was 400 mile old then blueprinted showed 178 bhp . the torque is over 90 ft lb from 7k! this thing pulls much harder than my bmw s1000rr
Have the option for a full 200 + bhp superbike engine if required (price to be negotiated)
16.5'' forged magnesium Dymags ( 3 sets in total ) all with brembo fully floating superbike discs (discs alone are £600 each!) wheels/tyres/discs are probably 10k new!
Big sbk bora rad and hose kit
Akra titanuim headers and mid section with alloy/ carbon custom cans
Spare brake pads/ tyres/and clip ons
Peter Hickmans 2010 bsb bike
Factory bitubo superbike forks (not just internals..these retail at 9k!)
Factory bitubo shock
Spondon swing arm
Quick release rear wheel
Factory shock / swingarm linkage
Yamaha italia ram air tubes
6 pit pretec calipers
Brembo sbk rear caliper
Brembo master cylinder
Pyramid Rear sets
Harris Clipons
Yec ecu and loom
Quickshifter
QAT
Race Subframe
Pit lane limiter
Hard and soft maps
Kit bell mouths and air filter
Superstock Motor fitted for reliability was 400 mile old then blueprinted showed 178 bhp . the torque is over 90 ft lb from 7k! this thing pulls much harder than my bmw s1000rr
Have the option for a full 200 + bhp superbike engine if required (price to be negotiated)
16.5'' forged magnesium Dymags ( 3 sets in total ) all with brembo fully floating superbike discs (discs alone are £600 each!) wheels/tyres/discs are probably 10k new!
Big sbk bora rad and hose kit
Akra titanuim headers and mid section with alloy/ carbon custom cans
Spare brake pads/ tyres/and clip ons
-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Re: Hello!!!!
Made me laugh jon! me dad told me start racing young it will br good for me racing hahah
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
thats some nice stuff you got there ! I best you can't wait ! 

-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

- PJC
- Donator
- Posts: 11776
- Joined: Thu Nov 29, 2012 8:39 pm
- Bike Make & Model: GSXR1000K5 5PW
- Location: No Fixed Abode
Re: Hello!!!!
Welcome in Keith, lovely bike you have there and its being kept in the best place
think you may struggle for spares on here m8, but you never know, enjoy the site



think you may struggle for spares on here m8, but you never know, enjoy the site

Tuck in behind me, i'll show you the best place to crash
Stopped drinking, smoking, taking drugs and running sex parties, luckily ive still bikes to corrupt me

-
- Been Here a While
- Posts: 126
- Joined: Sat Dec 22, 2012 7:08 pm
- Bike Make & Model: Yamaha r1 2009
Re: Hello!!!!
Yep in the house Alarmed and locked up to the max. It's not just for spares but you can get good advice now again of sites like this especially when like me you do no a lot about the bike. I'm alright with Hondas but not to hot on Yamahas
Any one fitted tc to there bike? I'm thinking about fitting it but haven't spoke or come across any who has yet. For racing.
Any one fitted tc to there bike? I'm thinking about fitting it but haven't spoke or come across any who has yet. For racing.
- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
There is Traction Control coming with the new Flash-Tune Bluetooth interface in the new year, along with data logging, although as you have a YEC ECU and loom that is no good for you, so as mentioned there are other systems like Bazzaz, although they are only rate based TC, so based on the Rev's rising they will retard the ignition to provide the TC.
The Flash-Tune system is a little bit cleverer than the Bazzaz system, using o2 sensor data as well as Rev's to determine a slide and retarding the ignition.
If I were you, and had any money left after buying the beast I would suggest looking at a system that incorporates a speed sensor, this will offer much more accuracy for determining if TC needs to fire on.
With any of these systems though you need tracktime to get an ideal setup, lots of trial and error, possibly at each track you are going to ride/race to take into account different corners where you might want the TC to fire or not (of the slide/spin is what you want at that corner)
Check out http://competitionsystems.co.uk/product.php?id=183 where they do the system for the R1 09-> as well as other bikes.
Hope that helps.
Mike
The Flash-Tune system is a little bit cleverer than the Bazzaz system, using o2 sensor data as well as Rev's to determine a slide and retarding the ignition.
If I were you, and had any money left after buying the beast I would suggest looking at a system that incorporates a speed sensor, this will offer much more accuracy for determining if TC needs to fire on.
With any of these systems though you need tracktime to get an ideal setup, lots of trial and error, possibly at each track you are going to ride/race to take into account different corners where you might want the TC to fire or not (of the slide/spin is what you want at that corner)
Check out http://competitionsystems.co.uk/product.php?id=183 where they do the system for the R1 09-> as well as other bikes.
Hope that helps.
Mike
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

- r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Hello!!!!
No Probs Butchos, the Flash-Tune System will be much better than the Bazzaz, and much cheaper than Bazzaz also, but if he has a YEC ECU then there is no need for the Flash-Tune, and for not much more than the bazzaz ZFiTC the Nemisis is a much better unit, there are others, similar price, just can't think who makes them right now, and kids are pestering me to take them out.
Mike
Mike
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com

- Bub
- Site Admin
- Posts: 12669
- Joined: Tue Nov 27, 2012 12:08 pm
- Bike Make & Model: S1000rr R1 GSX750
- Location: Chelmsford
- Contact:
Re: Hello!!!!
Hi Keith and welcome to the forum mate, nice looking bike you got there

SEND ME A PM TO BE ADDED TO THE FORUM MEMBERS MAP