exup

[woaty]

Hi peeps woaty here a newbie from the midlands / hoping someone can help , ? will a 97 plate r1 exup valve fit a thunderace as mine is knackered cant seem to find one for love or money many thanks regards woaty

[Luke03R1]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

[Luke03R1]

To your question i have no idea but you can as I did just wire the aces open it literally makes no difference to the power at all


Sent from my iPhone using Tapatalk

[woaty]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

[Luke03R1]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

not upset, just what we ask all new guys to do..... Locked in what way?


Sent from my iPhone using Tapatalk

[woaty]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

not upset, just what we ask all new guys to do..... Locked in what way?


Sent from my iPhone using Tapatalk

not sure went to newbie section where it normally says post it said locked

[woaty]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

not upset, just what we ask all new guys to do..... Locked in what way?


Sent from my iPhone using Tapatalk

not sure went to newbie section where it normally says post it said locked

this is wat it says / This topic is locked, you cannot edit posts or make further replies.

[samr1]

Hi woaty welcome I just looked all seems ok on newbie section some time crappa talk ain't the best ,try it again


Sent from my iPad using Tapatalk

[Luke03R1]

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!


Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

not upset, just what we ask all new guys to do..... Locked in what way?


Sent from my iPhone using Tapatalk

not sure went to newbie section where it normally says post it said locked

this is wat it says / This topic is locked, you cannot edit posts or make further replies.

That sounds like the welcome newbies thread you need to start your own by clicking start new thread/topic or whatever it says we've got a couple ace riders on here and I imagine a lot like me who had one in the past


Sent from my iPhone using Tapatalk

[stug]

You should try the exup1000 forum
I am sure I have read that most exup valves are the same with a few exceptions like the 5PW that has 2 valves.

[jompy]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

[woaty]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

hi bud to long in the tooth to worrie about kick up the arse ive got a plan ill take the out of me 750 and try that

[jompy]

4xv/5jj exup part number 4SV-14821-00-00
heres a list of bikes it fits

1997 YZF1000RJ EXHAUST
1997 YZF1000RJC EXHAUST
1998 YZFR1 - YZFR1K EXHAUST
1998 YZFR1 - YZFR1KC EXHAUST
1999 R1 - YZFR1L EXHAUST
1999 R1 - YZFR1LC EXHAUST
2000 R1 - YZFR1M EXHAUST
2000 R1 - YZFR1MC EXHAUST
2001 FZ1 - FZS1000N EXHAUST
2001 FZ1 - FZS1000NC EXHAUST
2001 YZFR1 - YZFR1N EXHAUST
2001 YZFR1 - YZFR1NC EXHAUST
2001 YZFR1 - YZFR1SN EXHAUST
2001 YZFR1 - YZFR1SNC EXHAUST

2002 FZ1 - FZS1000P EXHAUST
2002 FZ1 - FZS1000PC EXHAUST
2003 FZ1 - FZS1000R EXHAUST
2003 FZ1 - FZS1000RC EXHAUST
2003 FZ1 - FZS1000SPR EXHAUST
2004 FZ-1 - FZS1S EXHAUST
2004 FZ-1 - FZS1SC EXHAUST
2004 FZ1 - FZ-1S EXHAUST
2005 FZ1 (CA Ed.) - FZ1TC EXHAUST
2005 FZ1 - FZ1T EXHAUST
2005 FZ1 - FZS1T EXHAUST
2005 FZ1 - FZS1TC EXHAUST

1994 fzr1000F part number 3GM-14821-00-00
What bikes it fits
1989 FZR1000W EXHAUST
1989 FZR1000WC EXHAUST
1990 FZR1000A EXHAUST
1990 FZR1000AC EXHAUST
1991 FZR1000B EXHAUST
1991 FZR1000BC EXHAUST
1992 FZR1000D EXHAUST
1992 FZR1000DC EXHAUST
1993 FZR1000E EXHAUST
1993 FZR1000EC EXHAUST
1994 FZR1000F EXHAUST
1994 FZR1000FC EXHAUST
1994 YZF750RF EXHAUST
1994 YZF750RFC EXHAUST
1995 FZR1000G EXHAUST
1995 FZR1000GC EXHAUST
1996 YZF750RH EXHAUST
1996 YZF750RHC EXHAUST

heres where i got the info
http://www.partzilla.com/parts/search/Y ... parts.html
http://www.partzilla.com/parts/search/Y ... parts.html

[Luke03R1]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

[jompy]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

[Luke03R1]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

f**k you [emoji23]


Sent from my iPhone using Tapatalk

[Bub]

This is the newbie section

[R1Clarky]

This is the newbie section

Well spotted Bub m8 - that's why ur management


Sent from somewhere in the midlands by Paul

[Luke03R1]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

f**k you [emoji23]


Sent from my iPhone using Tapatalk

[woaty]

4xv/5jj exup part number 4SV-14821-00-00
heres a list of bikes it fits / thanks jompy for this / 750 valve fits and runs spot on will have to share the valve between the two

1997 YZF1000RJ EXHAUST
1997 YZF1000RJC EXHAUST
1998 YZFR1 - YZFR1K EXHAUST
1998 YZFR1 - YZFR1KC EXHAUST
1999 R1 - YZFR1L EXHAUST
1999 R1 - YZFR1LC EXHAUST
2000 R1 - YZFR1M EXHAUST
2000 R1 - YZFR1MC EXHAUST
2001 FZ1 - FZS1000N EXHAUST
2001 FZ1 - FZS1000NC EXHAUST
2001 YZFR1 - YZFR1N EXHAUST
2001 YZFR1 - YZFR1NC EXHAUST
2001 YZFR1 - YZFR1SN EXHAUST
2001 YZFR1 - YZFR1SNC EXHAUST

2002 FZ1 - FZS1000P EXHAUST
2002 FZ1 - FZS1000PC EXHAUST
2003 FZ1 - FZS1000R EXHAUST
2003 FZ1 - FZS1000RC EXHAUST
2003 FZ1 - FZS1000SPR EXHAUST
2004 FZ-1 - FZS1S EXHAUST
2004 FZ-1 - FZS1SC EXHAUST
2004 FZ1 - FZ-1S EXHAUST
2005 FZ1 (CA Ed.) - FZ1TC EXHAUST
2005 FZ1 - FZ1T EXHAUST
2005 FZ1 - FZS1T EXHAUST
2005 FZ1 - FZS1TC EXHAUST

1994 fzr1000F part number 3GM-14821-00-00
What bikes it fits
1989 FZR1000W EXHAUST
1989 FZR1000WC EXHAUST
1990 FZR1000A EXHAUST
1990 FZR1000AC EXHAUST
1991 FZR1000B EXHAUST
1991 FZR1000BC EXHAUST
1992 FZR1000D EXHAUST
1992 FZR1000DC EXHAUST
1993 FZR1000E EXHAUST
1993 FZR1000EC EXHAUST
1994 FZR1000F EXHAUST
1994 FZR1000FC EXHAUST
1994 YZF750RF EXHAUST
1994 YZF750RFC EXHAUST
1995 FZR1000G EXHAUST
1995 FZR1000GC EXHAUST
1996 YZF750RH EXHAUST
1996 YZF750RHC EXHAUST

heres where i got the info
http://www.partzilla.com/parts/search/Y ... parts.html
http://www.partzilla.com/parts/search/Y ... parts.html

[woaty]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve

[Luke03R1]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve

Is yours open or shut? Mine was standard apart from an exhaust can and ran perfectly with it wired open the exups main objective is noise reduction, I'd start with check in the plug colour if you haven't already

Edit: check the plugs ie colour

Sent from my iPhone using Tapatalk

[Steve R1]

Welcome to the forum Neil. You haven't upset anyone not even Luke, if you had we would all have known about it. Good luck with the exup . Mine got stuck once on my 4c8 bloody bike would not go over 30 mph which was bloody dangerous on the M6 . It was like driving a car with the speed limiter set


Sent from my iPhone using Tapatalk

[Steve R1]

Btw I liked your post because you confused Luke.... Nice one [emoji86][emoji85][emoji87][emoji204]


Sent from my iPhone using Tapatalk

[woaty]

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open


Sent from my iPhone using Tapatalk

hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve

Is yours open or shut? Mine was standard apart from an exhaust can and ran perfectly with it wired open the exups main objective is noise reduction, I'd start with check in the plug colour if you haven't already
nicked the valve out of me genesis to get me by for now but over xmass will strip down and have a proper look

Sent from my iPhone using Tapatalk