www.YamahaR.co.uk

Posted: **Sun Nov 15, 2015 2:00 pm**

Hi peeps woaty here a newbie from the midlands / hoping someone can help , ? will a 97 plate r1 exup valve fit a thunderace as mine is knackered

cant seem to find one for love or money many thanks regards woaty

Posted: **Sun Nov 15, 2015 2:14 pm**

Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk

Posted: **Sun Nov 15, 2015 2:15 pm**

To your question i have no idea but you can as I did just wire the aces open it literally makes no difference to the power at all

Sent from my iPhone using Tapatalk

Posted: **Sun Nov 15, 2015 2:51 pm**

Luke03R1 wrote:Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk

sorry to here this upset you luke but newbie section locked

Posted: **Sun Nov 15, 2015 2:54 pm**

woaty wrote:
Luke03R1 wrote:Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk
sorry to here this upset you luke but newbie section locked

not upset, just what we ask all new guys to do..... Locked in what way?

Sent from my iPhone using Tapatalk

Posted: **Sun Nov 15, 2015 3:07 pm**

Luke03R1 wrote:
woaty wrote:
Luke03R1 wrote:Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk
sorry to here this upset you luke but newbie section locked
not upset, just what we ask all new guys to do..... Locked in what way?

Sent from my iPhone using Tapatalk

not sure went to newbie section where it normally says post it said locked

Posted: **Sun Nov 15, 2015 3:11 pm**

woaty wrote:
Luke03R1 wrote:
woaty wrote:
Luke03R1 wrote:Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk
sorry to here this upset you luke but newbie section locked
not upset, just what we ask all new guys to do..... Locked in what way?

Sent from my iPhone using Tapatalk
not sure went to newbie section where it normally says post it said locked

this is wat it says / This topic is locked, you cannot edit posts or make further replies.

Posted: **Sun Nov 15, 2015 3:13 pm**

Hi woaty welcome I just looked all seems ok on newbie section some time crappa talk ain't the best ,try it again

Sent from my iPad using Tapatalk

Posted: **Sun Nov 15, 2015 3:47 pm**

woaty wrote:
woaty wrote:
Luke03R1 wrote:
woaty wrote:
Luke03R1 wrote:Woaty this is a pretty crap first post bud we do like an intro in the newbie section!

Sent from my iPhone using Tapatalk
sorry to here this upset you luke but newbie section locked
not upset, just what we ask all new guys to do..... Locked in what way?

Sent from my iPhone using Tapatalk
not sure went to newbie section where it normally says post it said locked
this is wat it says / This topic is locked, you cannot edit posts or make further replies.

That sounds like the welcome newbies thread you need to start your own by clicking start new thread/topic or whatever it says we've got a couple ace riders on here and I imagine a lot like me who had one in the past

Sent from my iPhone using Tapatalk

Posted: **Sun Nov 15, 2015 4:52 pm**

You should try the exup1000 forum
I am sure I have read that most exup valves are the same with a few exceptions like the 5PW that has 2 valves.

Posted: **Sun Nov 15, 2015 7:16 pm**

Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse

don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up

)

Posted: **Mon Nov 16, 2015 9:05 pm**

jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

hi bud

to long in the tooth to worrie about kick up the arse

ive got a plan ill take the out of me 750 and try that

Posted: **Mon Nov 16, 2015 10:14 pm**

4xv/5jj exup part number 4SV-14821-00-00
heres a list of bikes it fits

1997 YZF1000RJ EXHAUST
1997 YZF1000RJC EXHAUST
1998 YZFR1 - YZFR1K EXHAUST
1998 YZFR1 - YZFR1KC EXHAUST
1999 R1 - YZFR1L EXHAUST
1999 R1 - YZFR1LC EXHAUST
2000 R1 - YZFR1M EXHAUST
2000 R1 - YZFR1MC EXHAUST
2001 FZ1 - FZS1000N EXHAUST
2001 FZ1 - FZS1000NC EXHAUST
2001 YZFR1 - YZFR1N EXHAUST
2001 YZFR1 - YZFR1NC EXHAUST
2001 YZFR1 - YZFR1SN EXHAUST
2001 YZFR1 - YZFR1SNC EXHAUST

2002 FZ1 - FZS1000P EXHAUST
2002 FZ1 - FZS1000PC EXHAUST
2003 FZ1 - FZS1000R EXHAUST
2003 FZ1 - FZS1000RC EXHAUST
2003 FZ1 - FZS1000SPR EXHAUST
2004 FZ-1 - FZS1S EXHAUST
2004 FZ-1 - FZS1SC EXHAUST
2004 FZ1 - FZ-1S EXHAUST
2005 FZ1 (CA Ed.) - FZ1TC EXHAUST
2005 FZ1 - FZ1T EXHAUST
2005 FZ1 - FZS1T EXHAUST
2005 FZ1 - FZS1TC EXHAUST

1994 fzr1000F part number 3GM-14821-00-00
What bikes it fits
1989 FZR1000W EXHAUST
1989 FZR1000WC EXHAUST
1990 FZR1000A EXHAUST
1990 FZR1000AC EXHAUST
1991 FZR1000B EXHAUST
1991 FZR1000BC EXHAUST
1992 FZR1000D EXHAUST
1992 FZR1000DC EXHAUST
1993 FZR1000E EXHAUST
1993 FZR1000EC EXHAUST
1994 FZR1000F EXHAUST
1994 FZR1000FC EXHAUST
1994 YZF750RF EXHAUST
1994 YZF750RFC EXHAUST
1995 FZR1000G EXHAUST
1995 FZR1000GC EXHAUST
1996 YZF750RH EXHAUST
1996 YZF750RHC EXHAUST

heres where i got the info

http://www.partzilla.com/parts/search/Y ... parts.html
http://www.partzilla.com/parts/search/Y ... parts.html

Posted: **Mon Nov 16, 2015 10:54 pm**

jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )

It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk

Posted: **Tue Nov 17, 2015 10:18 am**

Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk

Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

Posted: **Tue Nov 17, 2015 10:45 am**

jompy wrote:
Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk
Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

f**k you [emoji23]

Sent from my iPhone using Tapatalk

Posted: **Tue Nov 17, 2015 10:53 am**

This is the newbie section

Posted: **Tue Nov 17, 2015 11:47 am**

Bub wrote:This is the newbie section

Well spotted Bub m8 - that's why ur management

Sent from somewhere in the midlands by Paul

Posted: **Tue Nov 17, 2015 11:48 am**

jompy wrote:
Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk
Awwww Luke I was only having a laugh buddy , I can't really tell him your soft as sh!t deep down because that would ruin your forum cred

f**k you [emoji23]

Sent from my iPhone using Tapatalk

Posted: **Tue Nov 17, 2015 5:50 pm**

jompy wrote:4xv/5jj exup part number 4SV-14821-00-00
heres a list of bikes it fits / thanks jompy for this / 750 valve fits and runs spot on will have to share the valve between the two

1997 YZF1000RJ EXHAUST
1997 YZF1000RJC EXHAUST
1998 YZFR1 - YZFR1K EXHAUST
1998 YZFR1 - YZFR1KC EXHAUST
1999 R1 - YZFR1L EXHAUST
1999 R1 - YZFR1LC EXHAUST
2000 R1 - YZFR1M EXHAUST
2000 R1 - YZFR1MC EXHAUST
2001 FZ1 - FZS1000N EXHAUST
2001 FZ1 - FZS1000NC EXHAUST
2001 YZFR1 - YZFR1N EXHAUST
2001 YZFR1 - YZFR1NC EXHAUST
2001 YZFR1 - YZFR1SN EXHAUST
2001 YZFR1 - YZFR1SNC EXHAUST

2002 FZ1 - FZS1000P EXHAUST
2002 FZ1 - FZS1000PC EXHAUST
2003 FZ1 - FZS1000R EXHAUST
2003 FZ1 - FZS1000RC EXHAUST
2003 FZ1 - FZS1000SPR EXHAUST
2004 FZ-1 - FZS1S EXHAUST
2004 FZ-1 - FZS1SC EXHAUST
2004 FZ1 - FZ-1S EXHAUST
2005 FZ1 (CA Ed.) - FZ1TC EXHAUST
2005 FZ1 - FZ1T EXHAUST
2005 FZ1 - FZS1T EXHAUST
2005 FZ1 - FZS1TC EXHAUST

1994 fzr1000F part number 3GM-14821-00-00
What bikes it fits
1989 FZR1000W EXHAUST
1989 FZR1000WC EXHAUST
1990 FZR1000A EXHAUST
1990 FZR1000AC EXHAUST
1991 FZR1000B EXHAUST
1991 FZR1000BC EXHAUST
1992 FZR1000D EXHAUST
1992 FZR1000DC EXHAUST
1993 FZR1000E EXHAUST
1993 FZR1000EC EXHAUST
1994 FZR1000F EXHAUST
1994 FZR1000FC EXHAUST
1994 YZF750RF EXHAUST
1994 YZF750RFC EXHAUST
1995 FZR1000G EXHAUST
1995 FZR1000GC EXHAUST
1996 YZF750RH EXHAUST
1996 YZF750RHC EXHAUST

heres where i got the info
http://www.partzilla.com/parts/search/Y ... parts.html
http://www.partzilla.com/parts/search/Y ... parts.html

Posted: **Wed Nov 18, 2015 6:30 pm**

Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk

hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve

Posted: **Wed Nov 18, 2015 6:35 pm**

woaty wrote:
Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk
hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve

Is yours open or shut? Mine was standard apart from an exhaust can and ran perfectly with it wired open the exups main objective is noise reduction, I'd start with check in the plug colour if you haven't already

Edit: check the plugs ie colour

Sent from my iPhone using Tapatalk

Posted: **Wed Nov 18, 2015 6:48 pm**

Welcome to the forum Neil. You haven't upset anyone not even Luke, if you had we would all have known about it. Good luck with the exup . Mine got stuck once on my 4c8 bloody bike would not go over 30 mph which was bloody dangerous on the M6 . It was like driving a car with the speed limiter set

Sent from my iPhone using Tapatalk

Posted: **Wed Nov 18, 2015 6:49 pm**

Btw I liked your post because you confused Luke.... Nice one [emoji86][emoji85][emoji87][emoji204]

Sent from my iPhone using Tapatalk

Posted: **Wed Nov 18, 2015 8:36 pm**

Luke03R1 wrote:
woaty wrote:
Luke03R1 wrote:
jompy wrote:Welcome in Neil
Cracking bikes the exup's , do you have a part number ?
Ha Ha Ha first post and a kick up the arse don't worry about it bud we're quite direct but mean no harm , if you have a sense of humor you'll enjoy the place ( Luke's usually really quiet h only ever moans , he's trying to get his post count up )
It was just a request not a kick in the ass! One you normally make.......
And I gave good advice what more do you want! Seriously both my ace and 750rsp ran spot on with the exup wired open

Sent from my iPhone using Tapatalk
hi luke was yours standard or was it rejetted , cus mine run like a bag of sh*t till i got over 5000 rpm without the valve
Is yours open or shut? Mine was standard apart from an exhaust can and ran perfectly with it wired open the exups main objective is noise reduction, I'd start with check in the plug colour if you haven't already
nicked the valve out of me genesis to get me by for now but over xmass will strip down and have a proper look

Sent from my iPhone using Tapatalk

www.YamahaR.co.uk

exup

exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

Re: exup

exup

Re: exup

Re: exup

Re: exup