Hello Everyone

[woody_02g40]

Hello, Im Paul, live near Worksop, Notts. Been a lurker on here for a while but I've finally pulled my finger out and started sorting my 4xv.

Came off on a trackday at cadwell (that was on my birthday!) several years ago, after stripping the bike down and threatening to sell the bits I've decided to sort it.

Bought another frame and some new wheels so i can get started. The bike, well, boxes of parts! have been moved around loads and as a result I've got bits missing. Also made a bad job of stripping it (didn't label/bag enough stuff) which will make the job harder!

So... the plan is to rebuild the bike, find out where everything goes buy any new parts then partially strip and do any restoration that is needed. Dooubt it will ever be as nice as it was but if i can get it back to being a clean useable bike again i will be happy.

please help with all the daft questions il be asking in the future

regards, Paul

[samr1]

Hi Paul welcome in, I'm there is enough people with 4xv's to show u the way


Sent from my iPad using Tapatalk

[woody_02g40]

Cheers Sam, i will need as much as i can get!

[R1Clarky]

Welcome in paul (fucking great name btw ) and good luck with the rebuild mate - loads of helpful peeps in here & a good dose of pi$$takers too but it'll help keep ya sane (probably)


Sent from somewhere in the midlands by Paul

[jompy]

Welcome in Paul
I guess a good idea if you haven't already is to download the parts micro riche , you could put your build in the projects section

[Bub]

Hi paul and welcome to the forum mate, if you had to get another frame and wheels I'm guessing it was a pretty bad off then ?

[pod]

Welcome in sir , goof luck with the rebuild

[woody_02g40]

Thanks lads! Good to be on here.

Welcome in Paul
I guess a good idea if you haven't already is to download the parts micro riche , you could put your build in the projects section

Is there a link for the download somewhere on the forum? that would be really handy. Thinking of doing a build thread, i find reading other peoples really useful

Hi paul and welcome to the forum mate, if you had to get another frame and wheels I'm guessing it was a pretty bad off then ?

yeah it was, slid off but the bike flipped up and smashed end over end, i will see if i can get any old pics.

[PJC]

Welcome in Paul, got any pics of the bike and/or the get off

You know what its like on here so enjoy now we are acquainted

[woody_02g40]

Welcome in Paul, got any pics of the bike and/or the get off

just found some after crash pics buried in my hard drive but they are only thumbnails and i can't re-size. It was my first track day too! gutted.

thanks to everyone for the replies

[jompy]

Paul goto the 4xv section there should be a link to them there , there sould also be some links in a thread to online parts micro fiches & parts checkers , if you don't find what you want in either place PM me your Email addy & i'll Email the sevice manual & parts micro fiche

[woody_02g40]

bikes current state. Work to do!

[woody_02g40]

Thanks Jompy, i'll have a look

[Luke03R1]

Welcome in bud, good luck with the build

[Siamblue]

Hi Woody and welcome in,sorry to here about your off,at least you came off unscathed.look forward to seeing your progress report on the old girl.

Gary

[Steve R1]

Welcome to the forum Paul, I'm sorry to hear of your off, bikes can be repaired, us humans are a tad more difficult. Hope you were ok. If it's any consolation I binned my bike on my first track day, so you are not on your own there. Yiu have come to the right place to ask questions as there are loads of knowledgeable peeps on here, unfortunately I'm the exception, but as they say there is one born every minute and that's me .

You will need a sense of humour as there is a lot of good humoured banter on here.

Good luck with the rebuild, I take my hat off to yiu as I would not be able to even contemplate doing that, iys way way beyond my skill level, and I know I would have some bugs left over at the end......

Anyway welcome to the firum and enjoy

Stephen aka the forum muppet

[LOCKE]

Welcome in mate. Good luck with the rebuild.

Colon

[woody_02g40]

Cheers Gary. Progress will be massively slow but it will hopefully get done. No physical injuries whatsoever.

Thanks for that Stephen, nice to know I'm not the only one throwing it up the road on my first go! I wasn't even going fast

[Steve R1]

Cheers Gary. Progress will be massively slow but it will hopefully get done. No physical injuries whatsoever.

Thanks for that Stephen, nice to know I'm not the only one throwing it up the road on my first go! I wasn't even going fast

Unfortunately I was still it's a learning curve and as long as we learn from our mistakes that's fine. The person who has never made a mistake has never done anything. I must do a lot cos I'm always making mistakes

[Bub]

Thanks lads! Good to be on here.

Welcome in Paul
I guess a good idea if you haven't already is to download the parts micro riche , you could put your build in the projects section

Is there a link for the download somewhere on the forum? that would be really handy. Thinking of doing a build thread, i find reading other peoples really useful

Hi paul and welcome to the forum mate, if you had to get another frame and wheels I'm guessing it was a pretty bad off then ?

yeah it was, slid off but the bike flipped up and smashed end over end, i will see if i can get any old pics.

Cool cheers pal, we do like pics on here [emoji106]


Sent from my iPad using Tapatalk

[petepassion]

Hi Paul, good luck with the rebuild

[woody_02g40]

thanks Pete