hi

New to the forum? Then say hello here
User avatar
Chinny
Donator
Donator
Posts: 1975
Joined: Sat Dec 08, 2012 3:32 pm
Bike Make & Model: 2010 YZFR1 14B
Location: Slough

Re: hi

Post by Chinny »

Welcome to the forum Alan, if you do get the R1 just hold on tight and enjoy it


Sent from my iPhone


biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Thanks for all the reply. I totally understand what you's are saying, I just though if I was just sensible I would be ok, I have not long sold my 530hp Silvia and although that car would easy do 180mph plus I bairly took it past 100 as I just used to enjoy cruising in it but I know the bike is totally different.
I did take cr500 on the back roads next to the woods as I lived near the country but it wasn't road legal but that was about 5 years ago then the bike got stollen.
samr1

Re: hi

Post by samr1 »

May be see if you can get a go on one or get on the back of one and see what it can do before committing,like Steve r1 said about his neighbours R1 I picked up mine 16months ago 08 plate 990 miles on it cos the bloke bought it scared himself witless only time he took it out was to mot station ,lot of money to be sat there doing nothing!


Sent from my iPad using Tapatalk
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

biker1985 wrote:Thanks for all the reply. I totally understand what you's are saying, I just though if I was just sensible I would be ok, I have not long sold my 530hp Silvia and although that car would easy do 180mph plus I bairly took it past 100 as I just used to enjoy cruising in it but I know the bike is totally different.
I did take cr500 on the back roads next to the woods as I lived near the country but it wasn't road legal but that was about 5 years ago then the bike got stollen.
Sorry to hear about your CR500 i've always been in awe of them & wanted to take one for a spin !

yes your right the Silvia is nothing like an R1 , a car you can use for comfort the whole point of a bike especially a sports bike is to ride ! having said that you may find the restraint , either way its your decision of it turns out for you :)
User avatar
LOCKE
Donator
Donator
Posts: 5064
Joined: Sun Jan 13, 2013 5:43 pm
Bike Make & Model: 2009 YZF R1 14B
Location: Glasgow

Re: hi

Post by LOCKE »

I had a SV650 which is a great bike to start off on and it won't get you into trouble. After that I got a GSXR600, now compared to the SV this was fast. A 600 sportsbike is plenty for the road and will reward you with the more miles you do, I loved this bike and had it for 3 years before buying a GSXR1000. I then had to learn the power and weight of the bigger bike to enjoy and appreciate it. Even going from the GSXR to the R1 was a learning curve again. You could buy a R1 and say you will just keep it steady but you wont. These litre bikes egg you on and things happen really quick which can end in tears. I've had fast cars but fast bikes are a whole lot different. Whatever you buy be sensible, enjoy and get as much miles under your belt in as many weather conditions you can.
Image
14B. Enough Said.

HEL Pirelli Akrapovic Brembo Gilles Tooling Pro-Bolt GBRacing PCV Renthal K&N
User avatar
petepassion
Donator
Donator
Posts: 4437
Joined: Sun Mar 09, 2014 8:09 pm
Bike Make & Model: YamaharZX6R
Location: Portsmouth

Re: hi

Post by petepassion »

Hi and welcome
Image
...I'm Just a passenger
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Hi,just thought I would say I ended up just buying a cbr900 streetfighter, I checked the facts and figures (125hp)and looks to be about the same as a modern r6 so hopefully this will be a bit better,I got it at a decent price so hopefully it will be fine.
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

Should have gone for an early R1 streetfighter ;)
hope you enjoy the bike bud & stay safe :)
User avatar
LOCKE
Donator
Donator
Posts: 5064
Joined: Sun Jan 13, 2013 5:43 pm
Bike Make & Model: 2009 YZF R1 14B
Location: Glasgow

Re: hi

Post by LOCKE »

Enjoy and learn mate.
Image
14B. Enough Said.

HEL Pirelli Akrapovic Brembo Gilles Tooling Pro-Bolt GBRacing PCV Renthal K&N
User avatar
R1Clarky
Donator
Donator
Posts: 6445
Joined: Mon Sep 08, 2014 11:42 am
Bike Make & Model: Yamaha R1 5JJ
Location: Leicestershire

Re: hi

Post by R1Clarky »

Congrats on getting the bladefighter mate , so are u still doing bike training or have u passed/got test booked :)


Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy :-)
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Thanks guys, I have my theory in 2 weeks then hopefully get my test booked straight after it
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

Rules still apply dude , where's the pics ? ;)
User avatar
R1Clarky
Donator
Donator
Posts: 6445
Joined: Mon Sep 08, 2014 11:42 am
Bike Make & Model: Yamaha R1 5JJ
Location: Leicestershire

Re: hi

Post by R1Clarky »

^^+1 jompy - let's see it then, your 'bladefighter' ;)


Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy :-)
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Image

Image

nothing crazy looking and not the best off streetfighters, it was dropped and broke a fairing so he just changed it but stil has original clocks etc, its got 26k miles,no service history :/ and its the last off the carbed version so ill have to learn how to clean them and tune them properly.
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

Mate it's looking good !
need's to be black ;) i'm not into those new fangled streetfighters they've been doing for the last number of year , i like the rip the plastics off , paint it black & stick some renthals on it look :D
as for the carbs just stick some Pro FST in the fuel when you fill up to clean them & keep them clean ;)
viewtopic.php?f=50&t=4415
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

cheers for that ill get some ordered, he says carbs are perfect just now so that stuff will hopefully keep it that way, ive been reading that i should turn fuel off and run the bike till it cuts out to empty th carbs so i might go do that today.
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

biker1985 wrote:cheers for that ill get some ordered, he says carbs are perfect just now so that stuff will hopefully keep it that way, ive been reading that i should turn fuel off and run the bike till it cuts out to empty th carbs so i might go do that today.
i surpose you could run the carbs to empty but i don't , infact thinking about it to run it dry would leave a residue of fuel in there which would dry up quicker leaving a coating of sh!te , i just put extra FST in the tank & run it so that its in the carbs carbs .
my bike must stand for 3 - 4 months some times & i've never had a problem & since i've been using FST for the last 3 years i don't expect any .
you'll here alsorts of things , i've heard some people say before they park they're bike for winter they drop the oil & replace it with cheap stuff & when they go to bring the bike out they replace the cheap oil with they're normal oil before they run it , apparently the exhaust gasses that get in the oil are not good for the bike , be fucked if i'm doing that !

use good oil & change it at the specified millage or before ;)
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

ah ok ill not bother then, its on reserve just now so ill fill it up and add 200ml. yeh ill be changing oil and filter soon with some good quality oil. valave clearances might need done but ill just leave that just now i think
User avatar
R1Clarky
Donator
Donator
Posts: 6445
Joined: Mon Sep 08, 2014 11:42 am
Bike Make & Model: Yamaha R1 5JJ
Location: Leicestershire

Re: hi

Post by R1Clarky »

Bike looks good mate - just take ur time after uve passed test to get to know it before u wring it's neck everywhere ;) ;)


Sent from somewhere in the midlands by Paul
Treat everyone with respect unless they prove themselves to be Unworthy :-)
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Yeh I'll defo take my time with it.Cheers
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Hi,thought if just ask you guys this question about the bike even tho it's not a R1.. Going from neatral to 1st at a stand still is give me a clunk and bike moves ever so slightly and also from neutral to 2nd does it,going from 1st to 2nd at a standstill works fine.
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

aye mate they do that when engaging a gear !
i've looked at bikes in the past & thought ouch but it's one of those things , could be the clutch needs slight adjustment but then i've seen it on new bikes too !
User avatar
jompy
Moderator
Moderator
Posts: 19692
Joined: Wed Jul 03, 2013 8:24 pm
Bike Make & Model: 98 4xv Half-One
Location: Derby

Re: hi

Post by jompy »

i know it's not quite the same & its bandits & Gixers but similar thing
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

I did go to adjust the cable but it was already tight with hardly any play at the lever next to the clutch but it had about 2mm play at the lever on the bar.
But that video was perfect thanks,I went and tried hitting it into gear harder and you there was hardly any clunk :)
biker1985
Lurker
Posts: 19
Joined: Sat Dec 20, 2014 4:44 pm
Bike Make & Model: r1 08

Re: hi

Post by biker1985 »

Just went out for another look (can't help myself)
I see why there is no free play down at clutch lever.. Obviously it comes back as the clutch engages fully butthe small spring around the arm wasn't strong enough to pull the cable through to take up the slack,if I pushed the clutch hand lever forward that worked. I just removed the cable and its knackered as i can bairly pull the cable through, ill go order anew cable now, is it worth buying a new clutch lever spring?

I'm not even sure if any off this makes sense haha
Post Reply