Hi, I have an 2004 R1 with only 13.000 miles. Anyway having owned this bike for 12 years It now seems I have a problem with the motor going on to 3 cylinders when idling..but clears when warmed up.
Thanks in advance.
Bike not running correctly.
-
jompy
- Moderator
- Posts: 19692
- Joined: Wed Jul 03, 2013 8:24 pm
- Bike Make & Model: 98 4xv Half-One
- Location: Derby
Re: Bike not running correctly.
Welcome in PhilR1 Phil wrote: Sun Nov 08, 2020 4:06 pm Hi, I have an 2004 R1 with only 13.000 miles. Anyway having owned this bike for 12 years It now seems I have a problem with the motor going on to 3 cylinders when idling..but clears when warmed up.
Thanks in advance.
could be a number of things from HT lead braking down or coil pack ( i believe the 5v y has one on each plug ) to wiring
Hope someone can shed more light for you
Re: Bike not running correctly.
Cheers ..I've had the TPS done,.a Powercommander has been fitted the last 10 years...........only a minor issue should solve it easily .
Re: Bike not running correctly.
Have you done a throttle body sync? If its clears when hot? Are you losing any coolant? Have you tried some millers fuel treatment? Do you have a power commander fitted?
Sent from my SM-G903F using Tapatalk
Sent from my SM-G903F using Tapatalk
Re: Bike not running correctly.
No throttle body sync - Haven't tried.millers .fuel treatment, yes I have PC111.
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
Re: Bike not running correctly.
Okay get some millers but disconct the power commander and see how it runs. If ok then millers an throttle body sync. Good luck let us me know how you get on.R1 Phil wrote:No throttle body sync - Haven't tried.millers .fuel treatment, yes I have PC111.
One tooth down front sprocket, K,& N,.decat Y piece ,-. And custom.map..very fast bike..mental top end..the first slight problem I've had with it..Cheers for replies chaps...
Sent from my SM-G903F using Tapatalk
-
r1Mike
- Site Admin
- Posts: 5726
- Joined: Tue Nov 27, 2012 12:14 am
- Bike Make & Model: R1 2CR,14B,4XV
- Location: Tropical Jersey, Channel Islands
- Contact:
Re: Bike not running correctly.
Check plugs then leads.
-------------
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com
2016 R1 - Spark Ti Decat/end can, FTecu flash & Blipper. ActiveTune, carbon wheels, Carbon Bodywork, i2M Dash and Logging
2006 R1 - MotoGP ProjectBike
1998 R1 - red/white bone Stock
1994 NSR250se MC28 HRC ignition card, derestricted for full power.
2024 ZX6RR 40th Anniversary, Graves Slip on.
All parts supplied by us - http://www.veloxracing.com
